How do you replace a hayward sand filter drain plug? Mine leaks & I can't get it out.
Reply
The removal of the drain plug should not be so tough. It is not a piece that gets removed weekly, so it may offer up some resistance. The top cap, like the plug should un-screw and the plug should slide out. If the tank is still completely full, there may be too much pressure. Try to remove some of the sand and try again, perhaps with a crescent wrench ( for leverage )
Reply
I have a reliant sand filter.. Will this replacement drain work with this brand filter?
Reply
Hi, This Drain Plug Assembly NE6170 can work on certain Reliant Sand Filter, if you can let us know which model you have we can confirm.
Reply
i have a problem ive messed up the treads on the drain plug screwing it in and out but i cant get the assembly thats in the tank itself to stop leaking im afraid ive miss it up too can i get a replacement part for that, i cant get this part out, will it come out
Reply
Terry, The drain assembly is threaded into the tank. You should be able to remove it.
Reply
Last fall my drain plug cap was stuck. I used a wrench for more leverage to turn the cap but the entire drain plug came out (I was probably turning cap the wrong way). I cannot seem to get the drain plug to thread back into the sand filter, although the threads on both do not appear to be damaged. I looked at the threading and it appears clockwise to thread as you look at the filter. Any suggesting for getting the drain plug back into the filter ?
Reply
Hi Dennis, If the threads appear to be fine you can try using teflon tape.
Reply
will this work with a RX Clear(tm) Radiant 22" sand filter. my part number is 647304073. I believe the exterior cap is a 7/8 compression threads
Reply
Hi Charles, This Drain Plug Assembly will replace p/n 647304073.
Reply
We bought the drain plug kit, and after putting it back together (had to use a wrench as it would not tighten due to sand constantly getting in the threads) it still leaks terribly. Any suggestions on how to avoid sand particles in the threads?
Reply
Hi April, You will have to remove the sand from the filter and rinse out the tank prior to installing the Drain Plug Assembly.
Reply
Will This fit a 24" Excel Sand Filter? They look identical by design.. Thanks
Reply
Hello Jacob- Unfortunately we have no information or schematics for the excel filters so we can not confirm this part will work. I would contact the MFG to see if they can get you a part number for the drain needed.
Reply
Where can I find this part? or is there anything else compatible with this sand filter?
Reply
You may pre-order this item on our website as this part will be back in stock and shipping on June 15th, 2017
Reply
what diameter is the threaded portion of this drain plug assembly?
Reply
Hi, Josh. The threaded portion of this assembly is 1 inches, click Product Dimensions to view.
Reply
I have a coleman above gtound pool and havemisplace the part that connects to the drain plug so i can connect the water hose to drain the pool. Q. where i purchase the drain adapter for the pool andwater hose.
Reply
Hi, Garry. You can purchase replacement parts for Coleman pools by contacting Bestway at 1-855-838-3888.
Reply
Hello- I think this is the drain plug that I need for my pool, but I need one that is 3/4" diameter. Could you please tell me the diameter of this particular drain plug? Thank You
Reply
Hi, April. To view the dimensions of this drain plug, click NEP2123 Dimensions.
Reply
I am looking for a replacement drain cap for a Rx Clear Radiant Sand Filter with a 24 inch tank. It was thrown away during clean up and is in the landfill now ... so I need just the cap, no the entire plug and cap assembly. Questions: Is this a compatible part? If so, can I buy just the cap? Thank you!
Reply
Yes, the Drain Plug Assembly NE6170 - NEP2123 is correct. Unfortunately, the cap is not able to be purchased separately.
Reply
I need a new drain assembly, I have a Best Choice Pro Above Ground 4500GPH 19” sand filter w/1.0HP. Is the NE6170-NEP2123 compatible with what I need? Thank you
Reply
Hi Priscilla, We spoke with Best Choice and they could not confirm that this is the drain for there filter and they do not sell replacement parts either. We are fairly confident this is the correct replacement drain plug however if it did not work then you could return to us, you would just be responsible for the return shipping charge.
Reply
will this fit splapool filter model #72729
Reply
I need the part that attaches to the drain to attach a water hose to drain the pool. It is a coleman above ground pool and I have lost or misplaced the attachment that screws onto the drain hole that releases the plunger that is inside and attaches to a water hose. Can you help me?
Reply
Hi Ruthie, could you send a few photos showing the area of where the part attaches or if you have any photos of the old part. To supply photos simply click on the reply link below to upload your photos.
Reply
What is the inside diameter of the plug?
Reply
Hi Stephanie, You can click this link to View the Dimensions of the NE6170 Drain Plug Assembly
Reply
Is there a lock nut on the inside of the sand filter tank that holds drain plug assembly. In other words do I have to empty the sand out of the tank if the plug is leaking on the outside? I would definitely appreciate a response. Thanks
Reply
Yes, there is a locking ring located on the inside of the NE6170 Blue Wave SandMan.
Reply
Water is leaking between the drain plug and the sand tank. I tried to tightening it but it gets worse. I have a NE6150/Ne6170 sand filter. Do I need a new assembly? Is there a lock nut on the inside of the sand tank that is loose or does it screw from the outside in directly into the tank.
Reply
Jim, yes, there is a lock nut located on the inside of this filter. We suggest getting the Drain Plug Assembly NE6170 - NEP2123 for the repair.
Reply
can something like this be adapted to a metal frame pool, specifically a 16' bestway, to prevent overfill?
Reply
I called 1 800-7590977 and asked how to remove leaking drain plug assembly gave my email address and no response. Filter is just over 1year old . Removed all sand ready to cut the part with saw..as it just spins.
Reply
I do not need the entire drain plug but instead just the cap for the outside. Can I purchase somewhere?
Reply
Hi Aaron, No the cap is not sold by itself and is only available as part of the assembly.
Reply
Do you have part # 647304073 (drain plug/gasket) for Reliant bc3040,bc3050,bc3060?
The replacement drain assembly for your Reliant sand filter is part number PL1650.
Reply
