Will this light bulb work on a Hayward Astrolite?
Reply
Yes, this bulb does work on Hayward Astrolite, as well as other makes and models of pool lights. The most popular of these lights being Pentair Amerlite, Hayward Starlite, Haward Duralite, and Sta-Rite SwimQuip Lights. Click here for a full listing of our >Pool Light Bulbs & Spa Light Bulbs.
Reply
My bulbs burn out after a few hours of use. What would cause this?
Reply
My first guess would be to check the voltage. If you are getting anything more than 12v to the light, it will run hotter and burn out quicker.
Reply
Can I replace myself?
Reply
Yes you can replace yourself as we have a great guide on How to Replace a Pool Bulb which will walk you through the process.
Reply
Will this Bulb fit and work with Hayward Astrolite Model # sp0581s15. I think it does but want to make sure.
Reply
Hello Orlando, yes the Seit NA700 bulb is compatible with the Hayward Astrolite fixture. I recommend confirming your voltage is 12 volts before placing the order.
Reply
Do you sell the replacement bulbs for Pentair Spectrum Amerlite lamp type EYC P/N 79112400
Reply
Hi Steve, Yes we do carry bulbs for the Pentair SAM Light you may view these bulbs at our Pentair SAM Lights Parts Diagram page
Reply
the label on my pool light reads
series 7883xx 7843xx
watts 300 volts 12 bulb type R-40. Will this bulb replacement fit? Thank you
Reply
Yes you may use this bulb or the 12V Pure Colors LED Bulb
Reply
how to install haywood in ground pool light bulb
Reply
If you just need to replace your light bulb then watch our Video on How to Replace a Pool Light Bulb If you require replacing the entire light fixture, then please watch our Video on How to Replace a Pool Light Fixture.
Reply
Hi, I have a philips 300W 12V bulb in a Hayward Fixture SP-506, SP-555, SP-507. Is this the Led replacement?
Reply
Hi Jon, This bulb is not a LED bulb, there is not a LED bulb that is compatible with that light fixture.
Reply
I have a inground pool light that is american products company pool light # f-026194 the boys and watts are completely blank on the housing. Will this light work for this model?
Reply
Hi, Matt. Unfortunately, we're unable to confirm using the info provided.
Reply
How do I know who is the manufacturer of my pool light. Is there a universal pool light replacement bulb?
Reply
Hi, Kathy. There is a sticker on the fixture housing that has the model info. Floodlight bulbs are universal, however, you will need the watts and voltage.
Reply
Is this the correct bulb for the Hayward Pool light Fix Mod: SP-581. This fixture was installed in 2002
Reply
Will this bulb work with Hayward SP 580?
Reply
Hi. Andrea, can you provide us with the specific model number of the pool light or the bulb specifications. The light label on the rear of the light should have the model number and the bulb often times have the specifications printed on the very top of them as well.
Reply
Is there a color changing LED 12 V option for replacing this light?
Reply
Hello, yes please see our 12 volt LED pool/spa light options here. Please see their product descriptions as they're only compatible with certain pool/spa light fixtures.
Reply
Our pool/spa and lighting was installed somewhere between 1978-1984 (Northern California, if that matters). Our spa has an 8 inch casing and the bulb and lens is shattered. I have no idea what the Voltage or Wattage is. Any suggestions on how to do determine? Is it safe to go with lower wattage? Is it more likely to be 12v vs 120v from that era?
Reply
Hi Eric, You would need to shut off power at the breaker to the pool light and then remove the pilot screw on the front ring of the light. You should then be able to bring the entire sealed fixture up onto your deck. On the back of the light where the cord attaches to the light housing there should be a product label with part #'s if you could take a photo of that label and send back to us then we can determine the proper replacement. To send photos simply click the reply link below and upload.
Reply
There isn't any labeling on it though is evident where there used to be one. There was a plastic pouch but the wording is very faded. I do see 791048. From research it appears to be the SS face Amerlite (https://www.inyopools.com/pool_parts_pentair_amerlite_pool_light.aspx). It appears to have been an incandescent bulb, but it is shattered and stuck in the socket. I don't see a transformer but the circuit breaker shows no rating on it. 120V 400W bulb seems like the right choice.
Reply
Hi Eric, Yes most likely the 400W 120V is what you will require.
Reply
