$144.71
Part # PL1102
Warranty 1 Year
Pureline 1 HP Replacement Pool Motor for Hayward® & Jacuzzi® Pumps
Is your pool pump motor running loud, leaking or humming? These are all signs that it’s time to be replaced. The PL1102 PureLine Replacement motor is designed as a drop-in replacement motor for some of the most popular 1 HP pool pumps like the Hayward® Super Pump, Hayward® Super II, Hayward® Max-Flo, Jacuzzi® Magnum and many more.
The PureLine replacement motor is made of the highest quality components like sealed ball bearings which means it is an ultra quiet motor. Because of its high-quality construction the PureLine replacement motor is backed by a full 1-year warranty.
When it comes to replacing your motor Inyo has you covered we have created a ton of resources to make this project a snap, like our Video on How to Replace a Pool Motor this video walks you through all the steps to replace your motor. Most of our customers decide to tackle this project on their own and by following our video they complete this project in about an hour.
When replacing your motor we highly recommend a tune up kit which includes all the seals and gaskets for your pump. Many times when you use your old seals you may have leaking and seal leakage is one item which will void the motors warranty so make sure to protect your investment with a tune up kit. Below we have listed the tune up kits for some of the most popular pool pumps.
Don't Forget Your Tune Up Kit
Hayward® Super Pump Tune Up Kit
Hayward® Super II Tune Up Kit
Hayward® Max-Flo Tune Up Kit
Jacuzz®i Magnum Tune Up Kit
Note: NOT California Title 20 Compliant.
California Title 20 Compliant Option:
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
I am looking for a replacement motor for my pool pump but all the ratings listed on the label are confusing me. What are the important stats on a motor label I should look for to ensure I'm getting the correct motor?
Reply
The key points on a label to know to ensure the proper motor selection are the Model number, Part number or Catalog number. If a match of one of these numbers is found, that match is the drop-in replacement for your motor. We also provide a guide on >How to Read a Pool Motor Label
Reply
I have a Hayward Super Pump, Model #C48K2N143B1. Which replacement motor do you recommend? I wouldn't mind have a dual speed with a timer if you have a motor that will fit my pump. Thanks
Reply
The correct replacement motor is the A.O. Smith 1 HP Round Flange Up Rate Motor - UST1102. If you are looking for a dual speed alternative, I would recommend the 1 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B975T,B2975T). Whenever you change out a motor, we recommend you replace the seals and the GOKIT3 will include all the o-rings and seals for the Hayward Super Pump.
Reply
I have a 1 1/2 hp Hayward Super Pump model # C48K2N143B1 which this pump is supposed to replace but this is only 1 hp. Is this the correct replacement motor?
Reply
Hello John- I would definitely verify the motor number and specification information on the label and compare it against the UST1152 1.5HP Motor. The models of this motor include C48K2N134B1 (slightly different than N143B1). You would also want to compare the impeller sizing to ensure it is sized for a 1.5HP motor and not a 1HP motor. Here is a link to the Hayward Super Pump parts page. Don't forget the Tune Up Kit!!
Reply
When attaching the impeller to the motor shaft, how do you hold the end of the shaft to tighten it on this model?
Reply
At the rear end of the motor where the shaft comes out you can hold it steady with a small wrench so that you can unscrew or tighten the impeller.
Reply
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set
1 0
Hello All,
Replacing the motor is a must to save money over buying a new pump all together. It is fairly easy for the mechanically savvy.
Turn off the power! Remove the back cover and disconnect the power leads. ***If you are not comfortable working with electricity, then STOP now! You should have an electrician or pool repair company do this repair!
There are 4 bolts on the motor mount that will need to be removed to release the motor from the pump housing. Then you can remove the motor from housing. You will need a 7/16 on the motor shaft on one end and then unscrew the impeller off the other end. You will then find that there are 4 more bolts holding the motor mount to the face of the motor.
I had to soak my bolts in PB Blaster overnight they were stuck pretty good. Once I was able to remove them, I used anti-seize paste when I reinstalled them into the new motor.
The one trick is making sure to install a new shaft seal, or you will have a leaky pump. Take care not to touch that with your dirty fingers. I use the paper that comes in the box to press the seal in place.
Everything goes back together in reverse order of taking apart :) wink. Further, there are lots of Youtube videos that you can watch for a more detail step by step.
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
1 0
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
1 0
So I ordered 1hp flange 56J up rate motor. Took out old motor. I replaced It with the 1hp 56J. This motor is much longer than the one I took out but I accomplished The task and it’s working fine.
Less than 1 hr
Screwdriver, Pliers, Socket Set, Wrench Set
1 0
So a 3 year lifespan on Hayward Super Pump. Pool company says just run it till it gives up the ghost. Bad idea, the old pump got so hot it melted the plastic into wet end. The PL pump was a direct replacement and actually easier to transfer into the Hayward. 7/16 wrench and the wiring was so easy for 220v there are two terminals for two wires + ground you really cant screw this up! Estimated savings about 350 from having pros handle. That buys a lot of chlorine/bromine for my pool!
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Adjustable Wrench
2 0
1. Powered off breaker.
2. Disconnected wires.
3. Removed the assembly from the filter basket
4. Removed Impeller
5. Removed motor.
5a. Cleaned all bolts and housing.
6. Connected the new motor
7. Connected the Impeller
8. Reattached to the filter basket.
9. Validated the wiring with INYO support.
10. Primed Filter.
11. Turned on breaker and restarted.
12. Worked like a charm.
1 to 2 hrs
Screwdriver, Socket Set, terminals and crimper
1 0
Ordered replacement motor and saltwater seal kit. Motor arrived three days later by UPS. Seal kit arrived in 4 days by USPS. Don't understand why it took that long for an envelope!! Would suggest UPS for Both items.
Installed seals and pump motor in a couple hours with no issues. Reinstalled entire pump and all seems to be working fine. Good service from INYO.
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Awesome
Was this review helpful to you?
(5 out of 5 stars) Quiet pump and just the right speed for the water fall add on
Reviewed By: Inyo Customer ()
Quiet pump and just the right speed for the water fall add on.
Was this review helpful to you?
(5 out of 5 stars) Pump really does the job
Reviewed By: Inyo Customer ()
Pump really does the job. Pool is crystal clear and the pump runs very quietly.
Was this review helpful to you?
(5 out of 5 stars) Just like new.
Reviewed By: Inyo Customer ()
Easy to install and fit exactly like the factory motor did.
Was this review helpful to you?
(5 out of 5 stars) 1hp 56j pump
Reviewed By: Inyo Customer ()
Easy to install and low operation noise.
Was this review helpful to you?
(5 out of 5 stars) Nice replacement
Reviewed By: Inyo Customer ()
This replaced a very old motor. It went onto the motor plate easily and was relatively easy to wire but wiring has to be done with the motor in a vertical position because the tabs are tucked away and hard to find once on the ground. Any help is just a click away with the INYO chat system.
Was this review helpful to you?
(5 out of 5 stars) Outstanding Customer Service
Reviewed By: Inyo Customer ()
Very fast shipping thankfully since our original pump motor was doa. Install was easy. Started to give 4 stars due to motor being a little noisier than original, but Inyo pools outstanding customer service and instructional videos deserve 5 stars in itself
Was this review helpful to you?
(5 out of 5 stars) No issues with fitment and easy to install
Reviewed By: Inyo Customer ()
Goods are in. No issues with fitment and easy to install
Was this review helpful to you?
(4 out of 5 stars) Nice, good working motor.
Reviewed By: Inyo Customer ()
Nice, good working motor. Easy to figure out how to install. It is pretty quiet while it is running.
Was this review helpful to you?
3 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Very simple to install and works very well.
Was this review helpful to you?
1 1
(5 out of 5 stars) Excellent replacement motor
Reviewed By: Inyo Customer ()
Excellent replacement motor, for good price
Was this review helpful to you?