By Maytronics
Part # 3295-076
Manufacturer Code 99956002RD-ASSY
Dimensions 9.75" X 8.625"
INYO # 3295-076
PLEASE NOTE MAYTRONICS # 99956002RD-ASSY IS DISCONTINUED AND REPLACED WITH 9995670-US-ASSY. WE WILL SHIP THE 9995670-US-ASSY.
GENERAL DESCRIPTION:
THIS IS THE POWER SUPPLY USED ON SOME DOLPHIN CLEANERS
MATERIAL:
THE BASIC BODY IS A VERY LIGHT GREEN GRAY PLASTIC COLOR
THE BASE HAS AN ALUMINUM HEAT SINK BUILT IN
THERE IS A HANDLE TO CARRY THIS WITH BUILT INTO THE TOP.
ON THE FRONT LEFT IS AN ON/OFF SWITCH
ON THE LOWER RIGHT SIDE IS A PLUG IN FOR THE CLEANER CABLE.
THIS PLUG IN HAS 4 SMALL ROUND FEMALE CONNECTORS.
THE PLUG IN INCLUDES AN ATTACHED COVER FOR USE WHEN THE CABLE IS NOT CONNECTED.
THERE IS A 7-1/2 FT. CORD WITH A NEMA 3-PRONG GROUNDED PLUG. (cord not included)
THE UNIT ALSO HAS A FUSE HOLDER ON THE BACK AND COMES WITH THE 2.5 AMP FUSE.
DIMENSION:
WIDTH: 9-3/4" (A)
FRONT TO BACK: 6"
HEIGHT: 8-5/8" (B)
MARKINGS:
THERE IS A LABEL ON THE BACK WITH THESE MARKINGS
TYPE: DIAGNOSTIC RD-AC
P.No. 99956002
INPUT: 115 VAC 60HZ 150W
OUTPUT: AC 21V NOMINAL
I need a part for my Dolphin pool cleaner but I don't see it on the parts breakdown. Is there still a chance you may still have it?
Reply
The manufacturer which is Maytronics, does not offer all parts for sale. If you don't see a part on the breakdown you can give us a call. For parts that they do not consider "DIY (do it yourself), you will need to contact them and send in the cleaner for repair.
Reply
We have a dolphin dx3 pool vaccum and the power supply unit needs to be replaced. Our current power supply unit is a diagnostic DC # 9995672, is this unit compatible with the vaccum we currently have?
Reply
We would suggest the same power supply you currently have which is the Dolphin DX3 9995672 Power Supply
Reply
If they say the motor isn't working. Do they mean the power nbox or does the main cleaner have a motor.
Reply
Hi Shanda, The cleaner does have a motor inside that is powered by the power supply. So that is the motor that isn't working.
Reply
