Model # S1G85MJL1A2S
The STS tank series is an all-in-one group and taken system that offers easy chemical replenishment and convenience. The unit is pre-assembled at the factory to help reduce installation time. The pump is mounted vertically for spill containment and includes a rain roof to prevent liquid intrusion into the motor housing. The tank systems are shipped with the single head Classic series pump models.
Features
Pump Specs. (Different Pumps Available Upon Request)
What is included with this pump system?
Reply
The following accessories are included: 3 Connecting nuts (1/4" or 3/8"); 3 Ferrules w/ 1/4" & 6 mm OR 2 ferrules w/ 3/8"; 1 Injection check valve (100 psi) OR (1) injection fitting (25 psi); 1 Weighted strainer; 1 20' Roll of suction/discharge tubing 1/4" or 3/8" white or UV black OR Europe 6 mm white; 1 Spare pump tube; 1 Mounting bracket; 1 Installation and maintenance manual
Reply
Can this pump be used to deliver liquid chlorine to my pool? I would like to make sure that the pump tubing and pump head can tolerate non-diluted liquid chlorine.
Reply
The S1G85MJL1A2S Stenner Pump w/ 15 Gal. Gray Tank System can be used with liquid chlorine if the strength of the sodium hypochlorite is less than 15%. You would have to check with the supplier of the sodium hypochlorite to find out the strength.
Reply
Can this pump w/ tank system work standalone? I have Auto Pilot nano salt water chlorination and need to feed acid to lower PH. I do not have any type of pool automation or controls. thanks.
Reply
Hello Fabio- To use the Stenner Pump w/ 15 Gal. Gray Tank System - S1G85MJL1A2S you will need at the very least a Chemistry Kit 1, pH and ORP Sense, ORP Dispense - AQLCHEM.
Reply
