$30.90

Qty:

By Marlig Industries


Details

Top

Model # 32OZFAL

Alternate Part #'s FAL32EACH, MLIFIXALEAK32

Product Description

Try Fix-A-Leak before you call for expensive leak detection services or repairs!  

This patented formula is made of a concentrated material designed to seal leaks in pools and spas.  Fix-A-Leak can provide a permanent seal for holes up to 1/8 inch diameter in the walls, floor, shell, and suction and plumbing lines.

  • 48 hours to harden and cure
  • Use 1 quart for pools up to 22,000 gallons
  • Use 4 oz per 250 gallons for spas
  • Safe for salt chlorine systems
  • Easy to follow instructions right on the bottle

Product Specifications

Size:
32 oz.
Top

?     Asked on 1/19/2009by Guest

Can you use this product to stop a leak in a vinyl liner pool?
 Reply

A  Answered on 1/19/2009 by InyoPools Product Specialist Patrick P.

This product will stop a pin hole leak in a vinyl liner pool if the leak is at the floor of the pool. The chemical is heavier than water so it will sink to the bottom.
 Reply


?     Asked on 1/26/2012by Guest

Is Fix-A-Leak safe for salt water pools?
 Reply

A  Answered on 1/26/2012 by InyoPools Product Specialist Patrick P.

Yes, Fix-A-Leak is safe for salt water pools and the salt cell does not have to be removed from your plumbing.
 Reply


?     Asked on 2/10/2012by Guest

How do I use Fix a Leak?
 Reply

A  Answered on 2/10/2012 by InyoPools Product Specialist Patrick P.

Depending on the type of leak you are looking to repair, there are certain steps you must take before and after using the product. If you are using Fix-A-Leak to seal a pinhole leak in a pool liner you will want to set your filter vale to recirculate. If you don't have a filter valve on your filter then you can remove the filter element from the filter. Once this has been done you can slowly pour the product through the skimmer. The product has very simple instructions on the container. If you want to see Fix-A-Leak in action, feel free to check out this > >video.
 Reply


?     Asked on 2/20/2012by Guest

What is the optimal water temperature to use Marlig Fix-a-Leak?
 Reply

A  Answered on 2/20/2012 by InyoPools Product Specialist Patrick P.

The manufacturer suggests that the water temperature should be 70 degrees fahrenheit or above.
 Reply


?     Asked on 12/20/2012by Guest

Does my pump and filter need to be running when I add Fix A Leak?
 Reply

A  Answered on 12/20/2012 by InyoPools Product Specialist Patrick P.

Yes, the pump and filter need to be running when Fix A Leak is added to the pool.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

My Skimmer Was Leaking

Written on 12/9/2020 by Guest

I followed the back of the bottle and this stuff worked. I did not have to tear out my cement which I was forever grateful for and was amazed by the product. Strongly recommend this product before spending big bucks.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

4 to 8 hrs

Tools Needed

saw to cut pipe to splice a hose connector, pump

My suction lines leaked

Written on 5/31/2020 by Guest

Installed a loop hose in the skimmer , inject the product and circulate in a closed loop for 2 hours, removed the hose and ran pool 48 hours later......leaks were slowed but not stopped.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Return line leak

Written on 7/29/2019 by Guest

Set my filter to recirculate. Poured into the pool let it run and by morning my water level quit dropping great stuff.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

More than 8 hrs

Tools Needed

None

Hot tub leaked

Written on 6/11/2019 by Guest

My husband has been trying to find the source of a leak in my hot tub for over a year. He removed all of the insulation and reinstalled every jet, sealing each with silicone and the tub still leaked.

I found Fix A Leak on the internet by doing a search. I ordered it right away and when the bottle was delivered my husband followed the directions on the Fix A Leak bottle and the leak was finally stopped. After running the solution through the system for two days he reinstalled the filter and he kept taking the filter out and rinsing it just clearing out any excess Fix A Leak.

Now my hot tub is fixed and I am a happy camper!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Slow Leak in Fountain Lines

Written on 3/28/2019 by Guest

This product is about as straight forward as they get. Put it in the line that has a problem. I actually poured this into a funnel at the fountain head and let gravity do its thing. Let it sit overnight and voila leak gone!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

2     1

Leak in return pipe underground

Written on 3/27/2017 by Guest

Discovered I had a leak in a return pipe under-ground, REALLY did not want to dig it up and repair. I read about Fix-A-Leak on INYOPOOLS website and decided to give it a try. I ordered 1 quart of Marlig Fix a Leak, arrived two days later, followed the directions on the website (instructions on product were unclear), it's been two weeks and no more leaks! Works perfectly!!!!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Unknown leak somewhere in pool water return for spa part of pool.

Written on 12/6/2016 by Guest

Used the liquid fix-a-leak as directed and leak was stopped.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.13  out of 5 stars)
74 Rating
5 star:
 
(40)
4 star:
 
(17)
3 star:
 
(10)
2 star:
 
(0)
1 star:
 
(7)

The Most Recent Reviews