Product Description

INYO # 3803-050 AFRAS # 10064VGBAW THIS IS COMPLIANT WITH THE ASME/ANSI A112.19.8-2007 REGULATIONS AS SPECIFIED BY THE VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT THIS IS A VGB-2008 COMPLIANT COVER

************************************************

GENERAL DESCRIPTION: 10" ROUND RETROFIT MAIN DRAIN COVER, WHITE (THIS REPLACEMENT COVER IS ABOUT 10" DIAMETER ITSELF BUT IS DESIGNED TO REPLACE COVERS IN THE 8" ROUND GENERAL RANGE)

************************************************

BASIC SPECS: CENTER TO CENTER SCREW HOLE MEASUREMENT: THERE ARE 2 SETS OF HOLES 6-7/8" TO 7-3/8" (REPLACES COVERS WITH HOLES IN THIS THIS SIZE RANGE) 10-1/2" (THESE HOLES ARE ON THE OUTSIDE RING) USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS SHOWN BELOW ARE FOR A SINGLE UNIT FLOOR: 188 GPM WALL: 160 GPM LIFE: 6 YEARS

************************************************

DETAILED DESCRIPTION: THIS IS THE AFRAS ABF 64A COVER. THIS IS AN ANTI-ENTRAPMENT RETROFIT COVER AND SCREWS THE TOP IS SOLID WITH A GRATED OPENING ALL ROUND THE OUTSIDE THIS ATTACHES TO THE MAIN RING OF THE COVER AT THE BOTTOM THE SCREW HOLES ARE OVAL IN THE TOP OF THE COVER, SO THE SCREWS MAY BE PLACED ANYWHERE IN THE OVAL OPENING, ALLOWING FOR A LITTLE VARIATION IN THE SPACING. THERE IS A SECOND SET OF SCRW HOLES IN THE RING AT 10-1/2" CENTERS MATERIAL: PLASTIC COVER, STAINLESS STEEL SCREWS COLOR: WHITE SHAPE: ROUND

************************************************

COVER DIMENSIONS: COVER OUTSIDE DIAMETER: 11-1/2" (A) (MAIN FLANGE RING) COVER TOTAL HEIGHT: 1-5/16" (B) MAXIMUM HEIGHT ABOVE MAIN DRAIN BODY: 1-5/16"

************************************************

SCREW HOLES: THIS COVER IS ALLOWS USE AS A 10" OR AN 8" REPLACEMENT COVER. THE TOP OVAL OPENINGS ALLOW SCREWS TO BE PLACED ANYWHERE FROM 6-7/8" TO 7-3/8" APART MEASURED AT THE CENTER THE 2 HOLES ON THE OUTSIDE RING ALLOW SCREWS TO BE PLACED 10-1/2" APART MEASURED AT THE CENTER

************************************************

SCREWS: THERE ARE 3 SETS OF SCREWS INCLUDED 2 SCREWS - #8 X 1-1/2" SELF TAPPING 2 SCREWS - #8-32 X 1-1/4 MACHINE THREADS 2 SCREWS - #10-24 X 1-1/4" MACHINE THREADS

************************************************

MARKINGS: MODEL ABF 64A (10064A) IS MOLDED INTO THE COVER THE SPECS REQUIRED BY THE VGB-2008 LAW ARE ALSO MOLDED ON THE COVER

Review Summary