$346.50
By AquaStar Pool Products
Part # 3816-025
Manufacturer Code RFS12105
Availability This Main Drain Has Been Recalled and is No Longer Available
************************************************
GENERAL DESCRIPTION: 12"X 12" SQUARE RETROFIT MAIN DRAIN COVER, DARK GRAY************************************************
BASIC SPECS: 2 OF THE SIDES HAVE 3 HOLES WITH 1 IN THE CENTER 2 OF THE SIDES HAVE 5 HOLES WITH 1 IN THE CENTER SEE BELOW FOR DETAILS USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS: SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 206 GPM @ 5.8 FPS WALL: 96 GPM @ 2.8 FPS LIFE: 5 YEARS TOTAL OPENING: 11.2 SQ INCH 52.3 GPM @ 1.5 FPS************************************************
DETAILED DESCRIPTION: THIS IS A 12" X 12" SQUARE REPLACEMENT COVER THIS IS AN ANTI-ENTRAPMENT RETROFIT COVER AND SCREWS THIS HAS SCREW HOLES DESIGNED TO LET IT REPLACE A WATERWAY, HAYWARD OR PENTAIR 12" X 12" SQUARE COVER THIS IS A MODEL 10AV 10" ROUND COVER ATTACHED TO A SQUARE ADAPTOR PLATE EACH SIDE OF THE SQUARE PLATE HAS A SQUARE NOTCH AT THE BOTTOM MATERIAL: PLASTIC COVER, STAINLESS STEEL SCREWS COLOR: DARK GRAY SHAPE: SQUARE************************************************
COVER DIMENSIONS: COVER LENGTH & WIDTH: 11-11/16" (A) HEIGHT: 1-1/16" (AT THE OUTSIDE EDGE) MAXIMUM HEIGHT: 1-21/32" (AT THE CENTER OF THE COVER) (B) MAXIMUM HEIGHT ABOVE PLASTER LINE: 19/32" FOR A 1-1/16" DEEP FRAME THIS WILL DEPEND ON THE DEPTH OF THE FRAME (THE SIDE OF THE COVER IS FLUSH WITH A 1-1/16" DEEP FRAME AT THE EDGE) THE CENTER OF THE COVER IS 19/32" TALLER THAN THE EDGE************************************************
SCREW HOLES: IN ADDITION TO THE SCREW HOLES AT THE EDGES OF THE ADAPTOR, THERE ARE 2 SCREWS USED TO ATTACHED THE ROUND CENTER COVER TO THE SQUARE ADAPTOR THE COVER HAS SCREWS PLACED SO THE COVER WILL MATCH THE OLDER STANDARD WATERWAY, AND THE PENTAIR AND HAYWARD OLDER AND CURRENT FRAMES THERE IS ALSO AN 11/16" DEEP NOTCH, 5/8" WIDE IN THE CENTER OF EACH SIDE FOR THE 2 SIDES WITH 5 HOLES THE DISTANCE FROM EACH HOLE CENTERLINE TO THE EDGE IS 5/16" FROM EACH SCREW HOLE TO THE OPPOSITE HOLE IS 11-1/16" (MEASURED ON THE CENTERLINE OF EACH HOLE) FOR THE 2 SIDES WITH 3 HOLES THE DISTANCE FROM THE CENTER HOLE CENTERLINE TO THE EDGE IS 5/16" THE DISTANCE FROM THE CENTERLINE OF EACH END HOLE TO THE THE EDGE IS 3/16". (THE END HOLES ARE MUCH CLOSER TO THE EDGE THAN THE CENTER HOLES ARE ON THESE 2 SIDE) FROM THE CENTER SCREW HOLE TO THE OPPOSITE SCREW HOLE IS 11-1/16" (MEASURED ON THE CENTERLINE OF EACH HOLE) FROM THE END HOLE TO THE OPPOSITE HOLE IS 11-5/16" (MEASURED ON THE CENTERLINE OF EACH HOLE) SCREW HOLE PLACEMENT: TOTAL SCREW HOLES - 16 THERE IS ONE SCREW HOLE IN THE CENTER OF EACH SIDE ON THE SIDES WITH 5 HOLES THE HOLES NEXT TO THE CENTER ARE 1-7/16" FROM THE CENTER HOLE (MEASURED ON THE CENTERLINE OF EACH HOLE) THE OUTSIDE HOLES ARE 4-5/16" FROM THE CENTER HOLE (MEASURED ON THE CENTERLINE OF EACH HOLE) ON THE SIDE WITH 3 HOLES THE OUTSIDE HOLES ARE 4-3/8" FROM THE CENTER HOLE (MEASURED ON THE CENTERLINE OF EACH HOLE)************************************************
SCREWS: THERE ARE COMPLETE SETS OF 3 DIFFERENT TYPES OF SCREWS THERE ARE ALSO 2 ADDITIONAL OF THE #10 X 3/4" SELF TAPPING USED TO HOLD THE ROUND COVER TO THE ADAPTOR (4) #10 X 3/4" LONG SELF TAPPING (4) #10 X 1-1/2" LONG SELF TAPPING (4) #10-24 X 1-1/4" LONG MACHINE THREAD************************************************
MARKINGS: MODEL 10-AV - P/N 10AV 101 THRU 108 IS MOLDED INTO THE CIRCULAR CENTER COVER P/N RFS12 101 THRU 108 IS MOLDED INTO THE BOTTOM OF THE SQUARE ADAPTOR THE SPECS REQUIRED BY THE VGB-2008 LAW ARE ALSO MOLDED ON THE COVER
