Product Description

INYO # 3815-041 HAYWARD # WG1033PAK2 THIS IS COMPLIANT WITH THE ASME/ANSI A112.19.8-2007 REGULATIONS AS SPECIFIED BY THE VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT THIS IS A VGB-2008 COMPLIANT FRAME AND COVER

************************************************

GENERAL DESCRIPTION: 18" X 18" SQUARE FRAME AND COVERS, WHITE, SET OF 2

************************************************

BASIC SPECS: USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS: SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 560 GPM WALL: 560 GPM LIFE: 7 YEARS TOTAL OPENING: 71.25 SQ INCH 331.1 GPM @ 1.5 FPS

************************************************

DETAILED DESCRIPTION: THERE ARE 2 FRAME AND COVERS PER PART NUMBER. THIS DESCRIPTION IS FOR EACH ONE OF THOSE 2. THIS IS AN 18" X 18" SQUARE FRAME, COVERS AND SCREWS THIS IS AN ANTI-ENTRAPMENT FRAME, COVERS, AND SCREWS THE FRAME ITSELF HAS A BRACE RUNNING FROM EACH SIDE TO THE OTHER SIDE WHICH CROSSES AT THE CENTER OF THE FRAME. THERE ARE 4 SEPERATE INNER FRAMES WHICH ATTACH TO THE FRAME AND BASICALLY DIVIDE IT INTO 4 SEPERATE 9" X 9" SECTIONS. A WGX1031B 9" X 9" COVER ATTACHES TO EACH OF THE 4 SECTIONS. EACH COVER IS ATTACHED WITH 4 SCREWS, 1 IN EACH CORNER. THESE ARE ATTACHED WITH A #10-24 MACHINE THREAD SCREW, 1" LONG EACH INNER FRAME HAS STAINLESS STEEL INSERTS IN THE CORNER TO MATCH MATERIAL: PLASTIC FRAME, INNER FRAME, AND COVERS STAINLESS STEEL SCREWS COLOR: WHITE SHAPE: SQUARE

************************************************

FRAME & COVER DIMENSIONS: TOTAL HEIGHT: 3-15/16" (B) FRAME ONLY HEIGHT: 2-7/16" FRAME LENGTH & WIDTH AT PLASTER LINE: 18-1/2" (A) FRAME MAXIMUM LENGTH & WIDTH AT MAIN FLANGE: 19-3/8"

************************************************

COVER DIMENSIONS: THERE ARE 4 COVERS PER UNIT COVER OUTSIDE LENGTH & WIDTH: 8-7/8" COVER ONLY HEIGHT: 1-3/4" COVERS EXTEND 1-1/2" MAXIMUM ABOVE THE FRAME WHEN INSTALLED

************************************************

SCREW HOLES: THE MAIN FRAME HAS 16 HOLES IN IT. EACH OF THE 4 INNER FRAMES IS ATTACHED TO THE MAIN FRAME WITH 4 OF THESE HOLES USING SELF TAPPING SCREWS. THE INNER FRAMES ARE ALREADY INSTALLED. THE 4 COVERS ARE ATTACHED TO THE 4 INNER FRAMES USING 4 OF THE #10-24 MACHINE THREAD 1" LONG SCREWS PER COVER, NEAR THE CORNER OF EACH COVER. FROM THE CENTERLINE OF EACH SCREW HOLE TO THE CENTERLINE OF THE SCREW HOLE ON THE OPPOSITE SIDE IS 7-3/4".

************************************************

SCREWS: 16 SCREWS - #13 SELF TAPPING (THESE ATTACH THE 4 INNER FRAMES TO THE MAIN FRAME) 16 - #10-24 1" LONG MACHINE THREAD SCREWS (THESE ATTACH THE 4 COVERS TO THE INNER COVERS) THE HAYWARD PART NUMBER FOR A SET OF 4 OF THESE SCREWS IS WGX1030Z1LA

************************************************

MARKINGS: WG1031F IS MOLDED INTO EACH INNER FRAME THE SPECS REQUIRED BY THE VGB-2008 LAW ARE MOLDED ON EACH COVER