$499.96
By Zodiac
Model # 2803-101
Manufacturer Code R0403900
Dimensions 7.25" L x 4.8" W x 0.75" D
INYO # 2803-101 JANDY # R0403900 THIS IS THE FRONT CIRCUIT BOARD USED ON JANDY AQUAPURE, ALL VERSIONS GREEN CIRCUIT BOARD WITH A 15" RIBBON CABLE CONNECTOR ATTACHED TO THE BOARD THIS CONNECTOR GOES TO THE BACK CIRCUIT BOARD MARKED "CLORAMTIC III FRONT PANEL" AND "PSD306-01" ON THE BACK OF THE BOARD DIMENSIONS RECTANGULAR BOARD LENGTH: 7-1/4" WIDTH: 4-7/8" (MAXIMUM WIDTH) 4-5/8" (WIDTH AT THE END)
Since this board is obsolete, what part has taken its place?
Reply
Hello Rick, unfortunately this part was made obsolete with nothing planned to take its place. If this board fails in your system you will likely have to purchase a whole new salt generator.
Reply
What specifically do I need to replace the now obsolete board? Part numbers so I can order through you would be helpful. A new controller? A new Aqualink panel?
Reply
Hi Rick, We contacted Zodiac / Jandy and they stated that if the front board goes bad on your AquaPure salt system then you would need to replace AquaPure Power Supply Part # APUREM and this should get you back up and running.
Reply
Have an aqua pure 1400. Control board got wet. Unit light comes on but no other lights to indicate flow, making chlorine, Etc. I am sure the unit is not making chlorine. Will replacing that front board do the trick? Or likely I need a new unit? I saw you have a unit on clearance for $499. Maybe better off doing that? Thanks much !!!!!
Reply
Replacing the board and possibility changning the flow switch will fix the issue. The $499 BW-CL120 would be a good system to replace your current system for that price range. Or if you wanted to stay with a Jandy going with APURE35
Reply
