$24.50

Qty:

By Hayward Pool Products


Details

Top

Part # 4662-16

Manufacturer Code ECX4077B1

Dimensions 1.7" L x 1.7" W x 1.7" D

Alternate Part #'s 171501040, 72189, EC4077B1, ECX4077B1, HAY0511860, 17-150-1040, HAY-051-1860, HAYECX4077B1, HPPECX4077B1

Product Description

OEM check valve used on the following Hayward cartridge and D.E. filters:

  • Star Clear
  • Easy Clear
  • ASL
  • Perflex
  • Regen-X

Check valves prevent the backflow of chemicals to pool equipment.

Top

?     Asked on 5/25/2015by Charles Pupich

how to install a ecx4977b1 check valve on a filter
 Reply

A  Answered on 5/27/2015 by InyoPools Product Specialist Lennox H.

Charles, This check valve just slides into the outlet port of the filter from the inside.
 Reply


?     Asked on 5/25/2015by Charles Pupich

My Hayward 50 filter just does not filter the water and the powder seems to shoot through its only two years old and my pool is 15k gallons above ground I did the following 1. Back flushed it 2. Replaced the check valve 3. Pressure is about 7lbs steady 4. Flow is good 5. Put 5lb of powder Any recommendations
 Reply

A  Answered on 5/26/2015 by InyoPools Product Specialist Patrick P.

Hi Charles, I am assuming you have the Perflex EC50 DE Filter, if so then I would check the condition of your Perflex DE Fingers and replace any that are torn or damaged. Damaged DE fingers are typically the culprit when getting DE powder back in your pool.
 Reply


?     Asked on 6/17/2015by tom

Could a bad check valve cause earth to return to pool ?
 Reply

A  Answered on 6/17/2015 by InyoPools Product Specialist Brian M.

Not typically. The most common cause of DE coming back into the pool is a broken ar ripped grid. The manifold could also be compromised, but that is less likely.
 Reply


?     Asked on 7/13/2015by joe

If my check valve is bad will that cause my filter pressure to run high?
 Reply

A  Answered on 7/14/2015 by InyoPools Product Specialist Lennox H.

Hi Joe, A bad Star-Clear Check Valve (ECX4077B1) will not cause the filter pressure to run high. You probably need to have the filter thoroughly cleaned out or replaced.
 Reply


?     Asked on 6/4/2016by Doug Gray

how do you remove the check valve
 Reply

A  Answered on 6/10/2016 by InyoPools Product Specialist Lennox H.

Hi Doug, To remove this check you will have to pull it out of the inlet port depending on the model of the filter you have.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

The Earth was coming out of return - check valve fell apart

Written on 8/17/2022 by Guest

Saw earth coming out of return and filter not working properly. Took tank apart and saw it needed to be changed. Check valve is at the mouth of the filter. Replaced and working great!!

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.6  out of 5 stars)
5 Rating
5 star:
 
(3)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews