$103.30

Qty:

By Waterway


Details

Top

Part # 4742-44

Manufacturer Code 550-1831

Dimensions 3.5" L x 3.5" W x 3.5" D

Alternate Part #'s 550-1831, 5501831, 31-270-1252, WW5501831B

Product Description

INYO # 4742-44 WATERWAY # 550-1831 GENERAL DESCRIPTION: THIS IS THE FLEXIBLE PUMP TO FILTER HOSE USED ON SOME WATERWAY PUMP AND FILTER SYSTEMS, 26" DIAMETER FILTER ONE END HAS A 2" UNION (ACTUAL UNION NUT THREADS MEASURE ABOUT 3-1/16" THE OTHER END HAS A SWEEP TYPE 90 DEGREE ELBOW WITH 1-1/2" UNION NUT THE UNION NUT THREADS MEASURE ABOUT 2-9/16" MATERIAL: HOSE: CLEAR FLEX PVC, 1-1/2" ID, 1-7/8" OD FITINGS: BLACK PLASTIC LENGTH: 32" (HOSE LENGTH BETWEEN FITTINGS) (A) LENGTH: 38-1/2" (TOTAL LENGTH END TO END) HOSE OUTSIDE DIAMETER: 1-7/8" (B) (1-1/2" ID PVC FLEX HOSE IS 1-7/8" OD) MARKINGS: "417-5020" ON END OF 2" UNION "413-5100" ON END OF ELBOW PARTS: 4742-138 (550-1841) SWEEP ELBOW, WITH RETAINER AND UNION NUT 9175-03 (400-5570) 2" UNION (THIS IS WHITE BUT WILL FIT) 9175-17 (711-4010) GASKET FOR 2" UNION 9175-16 (711-4000) GASKET FOR END OF SWEEP ELBOW

Top

?     Asked on 6/5/2015by Inyo Visitor

I have a BaquaPure sand filter Tank diameter 26 in. Purchased in (2005) I need the hose that runs from the pump to the pool. I will not be using the POLISHER . The hose that I was using from the POLISHER to the pool seems to be smaller in diameter. What size hose do I now need?
 Reply

A  Answered on 6/5/2015 by InyoPools Product Specialist Patrick P.

The hose on this page is the correct hose for the 26" BaquaPure Sand Filter, so this would be the hose you need.
 Reply


?     Asked on 6/5/2016by Steve

I have a waterway clearwater sand filter and a pentair optiflow pump and I need a pump to filter hose will this hose connect to both?
 Reply

A  Answered on 6/11/2016 by InyoPools Product Specialist Lennox H.

Hi Steve, We will need to know if the have the Sta-Rite or Pentair Optiflo pump, you may need to purchase this Adapter (417-4161).
 Reply


?     Asked on 3/29/2020by Craig Self

I have a Baqua 26" Blue sand filter purchased in 2002. I need the hose that goes from the filter to the polisher that I'm now using to put my chlorinating tablets in. Both ends of the hose are angled where they connect to the filter & polisher. They appear to be about 3 ft long.
 Reply

A  Answered on 3/30/2020 by InyoPools Product Specialist Lennox H.

Hi, Craig. There is not a specific hose that is used on the return side of the filter. However, if you can provide pictures of your setup we can see what you're referring to and make a recommendation. 
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)