Part # 5003-031
Manufacturer Code 356012
Dimensions 8.25" L x 8.25" W x 2" D
Pentair Seal Plate - 356012
Frequently Bought with Seal Plate
does this flange fit all Pentair superflow VS Poo; pumps? and why is there is crusting around the flange? is it calcium?
Hello, yes this will work for all Superflow VS pumps. In regards to the build-up, that will most likely be a calcium buildup and is just cosmetic, unless there is a leak.
Reply
I would like to know if the seal plate is the correct replacement for the Pentair Superflo 1HP motor. I need to remove motor and install a new seal plate.
Thanks.
Thank you for contacting Inyo Pools, Yes this is the correct seal plate. Seal Plate- Almond - 356012 I would replace all the seals a gaskets while it is apart Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax - GOKIT7
Reply
1 to 2 hrs
Screwdriver, Socket Set, Adjustable Wrench
2 0
Removed 4 bolts on either side of seal. Removed end of pump to hold shaft while removing impeller. Removed 2 rubber O rings on impeller housing, cleaned & lubed with pool & spa lube. Removed, cleaned & lubed 'spring' pressure seals @ hub of shaft. Reassembled in reverse order, primed pump, opened all valves & turned on pump. Water began to flow within a minute.
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
I had a leak between the motor and face plate. I put in the new face plate and it stopped the leak
Was this review helpful to you?
(4 out of 5 stars) Quick shipping. Quality product
Reviewed By: Rustin R. from Weaver, AL ()
Pros: Cost was fair. Shipping was quick. Part was exact
Cons: None
Quick shipping, quality part. As described and expected. Thank you
Was this review helpful to you?