Part # 3295-192
Manufacturer Code 9995658-ASSY
Dimensions 12.5" L x 8" W x 4.5" D
INYO # 3295-192 MAYTRONICS # 9995658-ASSY/ 9996555-US-ASSY has been replaced by DL-9995670-US-ASSY
Please Note: Maytronics power supplies no longer come with power cords. If you need a power cord you need to order Part # 5898412LF.
GENERAL DESCRIPTION: THIS IS THE POWER SUPPLY USED ON SOME DOLPHIN CLEANERS MATERIAL: THE BASIC BODY IS A VERY LIGHT GREEN GRAY PLASTIC COLOR THE BASE HAS AN ALUMINUM HEAT SINK BUILT IN THERE IS A HANDLE TO CARRY THIS WITH BUILT INTO THE TOP. ON THE FRONT LEFT IS AN ON/OFF SWITCH ON THE LOWER RIGHT SIDE IS A PLUG IN FOR THE CLEANER CABLE. THIS PLUG IN HAS 4 SMALL ROUND FEMALE CONNECTORS. THE PLUG IN INCLUDES AN ATTACHED COVER FOR USE WHEN THE CABLE IS NOT CONNECTED. THIS USES A 7-1/2 FT. CORD WITH A NEMA 3-PRONG GROUNDED PLUG. DIMENSION: WIDTH: 9-3/4" (A) FRONT TO BACK: 6" HEIGHT: 8-5/8" (B) MARKINGS: THERE IS A LABEL ON THE BACK WITH THESE MARKINGS TYPE: DIAGNOSTIC DC P.NO. 9995658 INPUT: 115 VAC 60HZ 150W OUTPUT: DC 30V NOMINAL
This Power supply Fits the following Maytronics Dolphin Robotic Pool Cleaners:
I need a part for my Dolphin pool cleaner but I don't see it on the parts breakdown. Is there still a chance you may still have it?
Reply
The manufacturer which is Maytronics, does not offer all parts for sale. If you don't see a part on the breakdown you can give us a call. For parts that they do not consider "DIY (do it yourself), you will need to contact them and send in the cleaner for repair.
Reply
IS THE PC BOARD REPLACABLE IN POWER SUPPLY 9995655 AND IS IT AVAILABLE
Reply
Hi Kevin, The "PCB Assy-9995453LF" for this power supply is available.
Reply
I have an older dolphin commander pool cleaner. The power supply unit is not working. The part number is 9995655 but it does not look like the one pictured. Will it be compatible with my cleaner?
Reply
Hi Patricia, This power supply is an updated unit which looks different but is compatible with the Dolphin Commander cleaner.
Reply
I have an older dolphin commander pool cleaner. The power supply part number is 9995655 but it does not look like the one pictured. Will it be compatible with a new Dolphin Caddy ? If so what Caddy do i need to buy ? Thank You Cynthia
Hi, Cynthia. The Power Supply you have has been replaced with the Dolphin Power Supply - 9995670-US-ASSY.
Reply
I have a dolphin pool cleaner MCC6. I have a Dolphin pro power supply PN 9995658. The power supply is only working for 5-8 minutes at a time and then needs to be turned off and on before it works again. My power supply looks somewhat different from the one you show (although the part numbers are the same) Mine also is 30VDC output. Will this work OK with my unit?
Reply
Hi. Yes, this Power Supply can use used to replace Part # 9995658.
Reply
The Most Helpful Review
2 0
(4 out of 5 stars) Works very well with Dolphin.
Reviewed By: judy from Delaware, Ohio ()
It was very good to find a replacement for my Dolphin power source. Good product and customer service.
Was this review helpful to you?
The Most Recent Reviews
2 0
(4 out of 5 stars) great swimming pool cleaner
Reviewed By: brooksie from dallas texas ()
Pros: easy to purchase
works really well - this one doesn't contain a fuse ( at least not one that is easily replaced) - my old one kept blowing fuses. I hope this one last a little longer than 2 years. It appears to be a little bit more durable.
Was this review helpful to you?