Product Description

INYO # 4890-085 ANTHONY # 39960344 GENERAL DESCRIPTION: THIS IS THE MAIN SHAFT WITH SPACERS USED IN THE ANTHONY 1-1/2" PUSH PULL VALVE GENERAL INFO MATERIAL: BRASS DIMENSIONS: LENGTH: 16-1/2"(A) SHAFT DIAMETER: 1/2" (B) SPACERS: TOTAL # 2 SPACERS INCLUDED 3RD SPACER IS NOT INCLUDED, IT COMES AS PART OF THE TOP PLATE DIAMETER: 1-5/8" THICKNESS: 1/4" FROM OUTSIDE TO OUTSIDE GROOVE: 1/8" SPACING: (MEASURED ON CENTERLINE FROM FIRST SPACER WITH THE FIRST SPACER AT ZERO) 1ST 0 2ND 9" 3RD 14-3/8" SPACER O-RINGS: (3) INCLUDED THESE ARE STRETCHED ON TO THE SPACERS SO THE DIMENSIONS SHOWN ARE FOR THE ORIGINAL O-RINGS BEFORE THEY ARE STRETCHED OUTSIDE DIAMETER: 1-5/8" INSIDE DIAMETER: 1-3/8" HOLES IN SHAFT: (MEASURED ON CENTERLINE FROM THE HANDLE END OF THE SHAFT) HOLE: 3/32" AT 1-1/2" FROM END HOLE: 3/32" AT 4-5/8" FROM END ASSEMBLY INCLUDES: SHAFT WITH 2 SPACERS O-RING FOR EACH SPACER (3 TOTAL) SHAFT O-RING SPRING PINS (2 TOTAL) MARKINGS: THERE ARE NO MARKINGS

*******************************************************************************

TOP PLATE INFO INCLUDED? NOT INCLUDED INYO # 4890-064 ANTHONY # 39960324 GENERAL DESCRIPTION: THIS IS THE TOP PLATE USED IN THE ANTHONY 1-1/2" PUSH PULL VALVE MATERIAL: BRASS SHAPE: TRIANGLE WITH ROUNDED POINTS THERE IS A 5/16" AT EACH POINT THE HOLE CENTERLINE IS ABOUT 5/16" FROM THE EDGE THIS TOP PLATE ALSO INCLUDES THE TOP SPACER CAST AS PART OF THE PLATE DIMENSIONS: WIDTH(CENTER TO POINT): 2-1/2" (A) TOTAL HEIGHT: 11/16" (B) CENTER HOLE DIAMETER: 1/2" INCLUDES: TOP PLATE WITH SPACER ONLY MARKINGS: "OPEN" AND "LOCK" WITH ARROWS CAST ON TOP

*******************************************************************************

Review Summary