By Hayward Pool Products
Part # 4800-15A
Manufacturer Code SX240D
Dimensions 6.89" X 0.89"
Lateral (Threaded Style) - SX240D Replaced by Hayward Lateral 10-Pack Threaded Models S210T/S220T/S230T/S244T - SX240DPAK10
Will this part fit the S244T model?
Reply
Here is a parts list for the Hayward Pro Top Mount Sand Filter 18”,21”,22”,23”,24”,27” Parts. On the key #8 shows SX200Q (4800-15) with a length of 4 3/4", BUT it also lists another Lateral SX240D (4800-15A) with a length of approx 6 7/8" that I believe is the correct lateral. Both of these are old styles that screw in. The new styles snap in and pivot and are totally different part numbers.
Reply
I need to replace a lateral in a Hayward S220T sand filter tank. There are two choices of laterals for this model #. Can you tell from serial # which one I need before dumping the sand? Serial # 21120705000013001 Thank you.
Reply
i have a old s240 filter ,before i drain sand how many lateral does it take or can i change over to folding type.
Reply
Hi Junior, The S240 uses 10 laterals and if you wanted to stay with the old style then you would use these SX240D laterals. If you wanted to change over to the folding style laterals then you can do so by purchasing this Hayward SX242DA S240 Folding Lateral Assembly
Reply
