Part # 4800-30
Manufacturer Code SX200QN
Dimensions 5" X 3/4"
INYO # 4800-30 HAYWARD # SX200QN
Save On Ten Pack - Lateral, Hayward S180T/S200/S210S, Ball Pivot Style 10-Pack - SX200QNPAK10
************************************************
GENERAL DESCRIPTION: PIVOT TYPE LATERAL THIS IS A HAYWARD PIVOT TYPE LATERAL USED ON A NUMBER OF FILTERS. THERE IS A BALL WITH A LOCKING TAB AT ONE END OF THE LATERAL. THE BALL FITS INTO THE HUB AND ALLOWS THE LATERAL TO BE SWIVELED UP AND DOWN TO MAKE REPLACING THE STANDPIPE ASSEMBLY A LOT EASIER. WHEN THE STANDPIPE IS IN PLACE, THE LATERAL IS SWIVELED BACK DOWN TO OPERATING POSITION
************************************************
MATERIAL: VARIOUS COLOR PLASTIC TYPE: SWIVEL PIVOT
************************************************
DIMENSIONS: OUTSIDE DIAMETER 7/8" (A) DIAMETER OF THE MAIN PART THE BALL IS ABOUT 1-1/4" X 1-3/8" THE BALL ADDS 1" TO THE TOTAL LENGTH OF THE LATERAL TOTAL LENGTH: 5-1/8" (B) LENGTH WITHOUT BALL: 4-1/8"
************************************************
MARKINGS: THERE ARE NO MARKINGS
I have model #S166T. Does this part fit in that model? It is around 10 years old. I keep getting sand coming through the filter.
Reply
The SX164DA Lateral Assembly would be the correct lateral assembly for the Hayward S166T Sand Filter.
Reply
I have a S180T model, is this the correct item for mine filter?
Reply
Hi John, yes this is the correct lateral (Pivot Style) for a S180T Haywared Pro Top model built after 2004. For models built in 2004 and before, you would want the threaded lateral.. Note: This shorter lateral (~5") is only used on the S180T). The other models listed under the Pro Top Series use the longer lateral (7")
Reply
Would this work on a swimpro high-rate sad filter
Reply
Hi Nancy, this lateral does fit a Swim Pro Sand Filter but there are a few different models of Swim Pro Filters and each uses a different lateral. Do you know the model # of your Swim Pro Filter? Can you supply the length of your lateral?
Reply
what would be the cause of sand filtering back into pool
Reply
Hi. That can be caused by a few things, check out these DIY Resources, Sand in Your Pool?, and How To Reduce Sand in Your Pool to uses as a great reference.
Reply
I have an older Hayward filter that I bought used, but the information has been worn off (removed) from the filter so I don't have a model number. I need to replace S200Q laterals. Will these fit / are these the right ones?
Reply
These are different than the SX200Q laterals so no these ones will not work. You will require these SX200Q Threaded Laterals for your filter which we do have in stock.
Reply
