By Waterway
Part # 5032-09
Manufacturer Code 310-4000
Dimensions 3.58" X 0.75"
INYO # 5032-09 WATERWAY # 310-4000 GENERAL DESCRIPTION: THIS IS A 1 HP IMPELLER USED ON THE WATERWAY HI FLO PUMP GRAY PLASTIC IMPELLER THIS HAS AN EXTENDED INLET OPENING AND AT THE SHAFT SIDE THERE IS SMALL RAISED RING AROUND THE SHAFT THE RING IS 5/16" TALL AND HAS AN OUTSIDE DIAMETER OF 1-9/16" THIS ALSO HAS A SMALL RIDGE AROUND THE OUTSIDE DIAMETER OF THE IMPELLER ON THE SHAFT SIDE
***************************************************************************
CLOSED FACE OR OPEN IMPELLER: CLOSED FACE NUMBER OF VANES 6 OUTSIDE DIAMETER: 3-5/8" THICKNESS: 5/16" (INSIDE VANE THICKNESS AT OUTSIDE EDGE OF IMPELLER) THICKNESS: 3/4" (OUTSIDE VANE THICKNESS AT OUTSIDE EDGE OF IMPELLER) FRONT TO BACK: 3-3/16" (FROM END OF SHAFT TO FRONT ON INTAKE) INLET INSIDE DIAMETER: 1-1/2" INLET OUTSIDE DIAMETER: 1-7/8" INLET LENGTH: 1" THIS IS THE APPROXIMATE LENGTH OF THE EXTENDED INLET PORTION OF THE IMPELLER
****************************************************************************
MARKINGS: "313-1440" MOLDED ON THE SHAFT SIDE "SIDE DISH COVER 313-1520" IS MOLDED ON THE INLET SIDE THIS HAS MARKINGS FOR 3 DIFFERENT HORSEPOWER IMPELLERS ON THE INLET SIDE THIS COVER PIECE IS USED ON 3 DIFFERENT IMPELLERS "ASSY 310-4000-C - HP" "ASSY 310-3990-B - 3/4 HP" "ASSY 310-3980-A 1/2 HP" ARE ALSO MOLDED ON THE INLET SIDE SHAFT SEAL USED WITH THIS IMPELLER OPT # 5250-106 GENERIC # PS-1000
Hello, I am about to order a part online. I got an email for "up to 50% off" on parts. How do I know if this part is included? thank you.
Reply
Hi Tim, The 50% off was for the select items that were included in the email and unfortunately this was not one of those items. You should have received an email a few days ago with a $5 off coupon which you can use.
Reply
will this impeller fit my pump sd-15-1n11cc
Reply
Hello, this impeller goes to Waterway Hi-Flo Above Ground Pump.
Reply
