By Balboa
Part # 5190-150
Manufacturer Code 1212206
Dimensions 4" X 0.325"
************************************************
GENERAL DESCRIPTION: CLOSED FACE GRAY IMPELLER, 1/2 HP THE INLET OPENING IS DOUBLE STEPPED ON THIS IMPELLER THE SHAFT SIDE OF THE IMPELLER IS FLAT. THE INLET SIDE SLOPES SLIGHTLY FROM THE EDGE TO THE INLET THIS HAS A STRIPE ON THE SHAFT TO IDENTIFY THE IMPELLER************************************************
MATERIAL: GRAY PLASTIC TYPE: CLOSED FACE NUMBER OF VANES: 5************************************************
DIMENSIONS: OUTSIDE DIAMETER 4" (A) TOTAL LENGTH: 3-1/4" OUTSIDE THICKNESS AT EDGE: 5/16" (B) INSIDE THICKNESS AT EDGE: 3/32" SHAFT LENGTH: 1-7/8" SHAFT DIAMETER: 11/16" INLET OPENING OUTSIDE DIAMETER: 2" INLET OPENING INSIDE DIAMETER: 1-1/2" THE SECOND STEP BELOW THE INLET IS 2-3/8" DIAMETER INLET LENGTH: 3/4" THE INLET IS 9/32". THE SECOND STEP IS 15/32".************************************************
MARKINGS: STRIPES ON SHAFT STARTING FROM THE END THESE ARE GREEN SPECIAL NOTE: CURRENT IMPELLERS ARE BEING MADE WITH NO STRIPES ON THE SHAFT
