$19.02
Part # 3530-09
Manufacturer Code MR16EYC
Dimensions 1.75" X 2"
BULB, QUARTZ - 12V 75W MULTI-R (MR16EYC)
My original in ground pool lights went out after 12 years. I have the Pentair Spectrum Amerilite (SAM) unit in both my pool and connecting spa. The nomenclature on my unit says: No. T-826048 light fixture with bulb type MR16, 75 W, bulb series 600015, 600016, 600017 and 600022.
Can I replace my SAM light bulbs with an upgraded bulb (ie an LED bulb)? If so, which should I replace with? Thank you.
Reply
Hi Bill, Unfortunately there is not an LED bulb replacement for the SAM lights. If you wanted to upgrade to LED then you would require replacing your entire pool and spa light fixtures. The Pentair Intellibrite LED Pool & Spa Lights would be the direct LED replacement for the SAM lights. Here we have a great Guide With Video on How to Replace a Pool Light Fixture. If you would just like to replace your current SAM light MR16 bulbs then we carry the Pentair SAM Light Bulbs as well as all of The Replacement Parts For The Pentair SAM Light.
Reply
I have 2 JANDY COLOR LIGHTs in my pool and a small one in the spa. The Number on the housing says JPL120100 165 watt 120v 2 75watt. Are all the lamps in each light (8ea.)MR16 eyc 120 volt bi pinI\. I need all 16 lamps
Reply
Hi Dave, These are the correct replacement bulbs for the Jandy WaterColors JPL120100 which requires 8 bulbs. You may want to look into replacing the complete light fixture, the cost of the bulb and the lens gasket is no longer available.
Reply
TRYING TO FIND REPLACEMENT BULB FOR MY POOL LIGHT, ITS A HAYWARD SP0565Z1 , 12VOLT , 50 WATT MAX
Reply
Hello, The correct replacement bulb for your light is the Elite Replacement Halogen Lamp W/reflector 12v 50w (spx0565z1).
Reply
I have a Jandy Colors light in my pool that went out. Do I need to get all 8 bulbs to replace?
Reply
Hi. If all the bulbs are blown then you'll need to replace them all or make sure that the fixture isn't bad.
Reply
I have to Jandy Colors model JPL12050 in my pool now that are not working. Can you tell me is there a replacement that can be substituted without replacing the Niche. If there is do you carry them?
Reply
Hi, Tom. We will need to know the model of your niche in order to locate a suitable replacement. However, can use the Hayward ColorLogic Universal LED Fixture or the Color Splash Pool LED Fixtures.
Reply
The Most Helpful Review
3 0
(3 out of 5 stars) Fair quality
Reviewed By: Troy D. from Lakeville, MN ()
Pros: Seemed to work as well as originals
Cons: One went out early
I ordered 4 of these lights and 3 worked great but one went out after about 1 week of operation. Fluke??
Was this review helpful to you?
The Most Recent Reviews
1 0
(5 out of 5 stars) Great
Reviewed By: Inyo Customer ()
I got 4 of these as part of my pool enclosure setup after being sold from this blog: http://www.coversinplay.com/blog/2017/09/20/the-benefits-of-an-automatic-swimming-pool-enclosure/ I've got to say these bulbs have worked fantastically well! Well worth the money
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Joni V. ()
The Bulb was perfect I finally have light again in my pool I'm so glad I found your web site
Was this review helpful to you?