By Waterway


Details

Top

Part # NE6450

Manufacturer Code PD1100-6

Alternate Part #'s PD11006, WWPPD11006

Product Description

Waterway’s Hi-Flo Above Ground Pump delivers superior and efficient performance at an affordable price. The Hi-Flo pump offers a higher flow rate than most above ground pumps for better circulation and filtration. You can easily rotate the wet end from vertical to horizontal, making it ideal for new installations or as a replacement pump. 

Features

  • 1 1/2″ Union threads / 1 1/2″ FPT Intake and 2″ Union threads / 1 1/2″ FPT discharge
  • Powerful side discharge performance
  • Wet end can be rotated for easy installation
  • Large 6″ pump trap with 2-piece lid
  • High head capability
  • Trap is 2″ union x 1 1/2″ union / 1 1/2″ FPT

 

 

Product Specifications

HP:
1 HP
Speed:
Single
Volts:
115 V
Port Size:
1.5 in.
Cord Type:
Standard 3-Prong
Cord Length:
3 ft.
Top

?     Asked on 8/7/2012by Guest

I have a JWPA5E7L-2A2, do you carry a replacement for this model pump?
 Reply

A  Answered on 8/7/2012 by InyoPools Product Specialist Patrick P.

The JWPA5E7L-2A2 has been discontinued by Sta-Rite, we show that this pump was a 1 HP above ground pool pump with a horizontal discharge. With this being said we would suggest the Waterway 1 HP pump listed on this page which has a discharge port which can be set to vertical or horizontal, this will allow for minimal plumbing changes on your end.
 Reply


?     Asked on 1/28/2015by Brian Noren

What are the warranty terms on this pump?
 Reply

A  Answered on 1/28/2015 by InyoPools Product Specialist Alex V.

Brian, The pump has a 1 year manufacturer's warranty. You would typically contact them directly for any warranty issues.
 Reply


?     Asked on 9/28/2015by Fabian JImenez

Is this pump good enough for a 24ft round pool or should i go with a 1 1/2 pump?
 Reply

A  Answered on 9/29/2015 by InyoPools Product Specialist Robert M.

Hello Fabian - The 1HP Dynamo pump would be sufficient for a 24' above ground pool.
 Reply


?     Asked on 10/24/2015by brian

will this be adequate for a 28 ft pool? thanks
 Reply

A  Answered on 10/26/2015 by InyoPools Product Specialist Hector F.

As far as the water turnover rate needed to circulate this pool, yes but you need to make sure that the gallons per minute rating on the pump is compatible with the gpm rating for the filter.
 Reply


?     Asked on 3/6/2016by Rick

Is the picture shown a vertical discharge pump? Is it possible to order it with a horizontal discharge pump?
 Reply

A  Answered on 3/8/2016 by InyoPools Product Specialist Lennox H.

Hi Rick, This pump is not available with a horizontal discharge, however you can rotate the wet end so that it is horizontal.
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Nut Drivers, Pliers, Socket Set, Wrench Set

2     1

Old pump kept shutting off from the overload.

Written on 7/28/2020 by Guest

Disconnected power and shut off supply and return valves. Drained system. Disconnected plumbing from the pump. Unbolted pump from base. Pulled new pump from box. Had to mount strainer basket to pump.

Bolted down new pump to base. Connected supply and return plumbing. Opened valves and bled air from strainer basket. Closed strainer basket. Attached a ground wire to the external terminal on pump and ran it to my house ground rod. Plugged in power and turned pump on.

Bled the rest of the air through the high point in my system on top of Hayward canister filter. So far so good. Works great!

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews