By Waterway
Part # 372082113
Dimensions 15.5" L x 8" W x 8.5" D
When matching pumps always use AMPERAGE rather than Horsepower. Many times the labeled Horsepower does not accurately represent actual horsepower.
Pump, WW Exec, 2.0hp, 230v, 2-Spd, 56fr, 2-1/2" x 2", OEM
The Executive 56 Frame Spa Pump has an executive wet end designed for 56-Frame motors along with two double-shielded ball bearings with moisture-resistant grease for quieter operation and long life. The dual speed motors have insulated windings for increased efficiency and large, highly versatile 6-1/2" diameter wet end for higher head pressure. A split capacitor (start and run) allows for less energy consumption.
Spa Pump Features:
| Manufacturer | Waterway |
| Pump Model | Executive |
| Speed | 2 Speed (2-Spd) |
| Motor Voltage | 230v |
| Drain Plug Location | 3,6,9 o`clock |
| Suction Style | Center |
| Suction Connection Type | Male Buttress Thread (mbt) |
| Suction Pipe Size | 2-1/2" |
| Discharge Style | Side |
| Discharge Connection Type | Male Buttress Thread (mbt) |
| Discharge Pipe Size | 2" |
| Horsepower | 2.0hp |
| Motor Frame | 56 Frame Thru-Bolt |
| Motor Amperage/Wattage | 8.0A/3.0A |
Waterway, a leader in spa, bath, and pool products, provides the reliable Executive 56 pump for a great value. Executive 56 spa pumps are energy efficient and produce clear-cut performance. The wet end of each pump has the ability to rotate, offering an easy, no hassle installation.Specifications
I need the wiring order, this pump has the numbers 1, 2, 3 or 4 and the other pump in my spa has H, C, and L. So I guess my question is, what wire goes on 1, 2, 3. Is 1 high, 2 common and 3 low.
Reply
Hi, Cindy. Terminal 1 is C, Terminal 2 is H and Terminal 3 is L.
Reply
Is this pump comparable to the Balboa Ultamax 1016204
Reply
No this is not the pump we would suggest. You will need this Balboa Ultamax 1016204 which we do have in stock ready to ship!
Reply
Need a 2 hp pump with 1.5 inch intake and discharge. Do you sell one like that?
Reply
Hello, could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
I have a Century 2 speed pump currently 7-193675-01. Can this pump replace that?
Hi William, for us to suggest the proper seal kit and or pump could you send a photo of a wide shot of your complete pool pump to show the pipes going in and out of the pump? To supply this photo simply click the reply link below and upload your photo. Once we get this photo we can make the proper recommendations.
Reply
Will this replace a pump #7-193675-01 pump? Ours is a frame 56, HTZ 60, 3450/1725 rpm, 230 volts, 8.8/3.0 volt
Reply
Hi Doreen, could you send us a few photos of your pump? Please take a close up shot of the pump label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
