$74.99

Qty:

By PureLine


Details

Top

Part # PL0145

Manufacturer Code CX900RE

Dimensions End Cap = Round, Length = 17 3/8", Outside Diameter = 8 15/16", Inside Diameter = 4"

Alternate Part #'s 19002, 25230-0095S, 252300095S, 817-0100N, 817-0100P, 8170100N, 8170100P, C-8409, C8409, CX900RE, FC-1292, FC1292, HAY06633, PA90, PC1292, R173272, XLS-818

Product Description

PureLine Aftermarket Replacement Cartridge for Sta-Rite® Posi-Clear PXC95, Waterway® Proclean , Waterway® Clearwater II , Hayward® Star Clear Plus C-900 Filters

Is your pool water starting to look a little dull? Is your pressure gauge reading a higher PSI than normal? Are your pool jets a little less powerful? These are all signs that it is time to replace your pool filter cartridge. Replace your pool filter cartridge today and regain that crystal clear pool water and extend the life of your pool pump.

Typically for single cartridge pool filters we suggest replacing your cartridge every 6-12 months and for filters which take multiple cartridges, we suggest replacing your cartridges every 3 years.

This Cartridge is Commonly Used In

PureLine Cartridge Benefits

  • Less expensive than the original manufacturer with the same high-quality standards
  • Designed for maximum water flow to extend cartridge life
  • Designed for even dirt distribution resulting in increased water flow
  • Increased flow rates results in less wear on pump & reduced energy usage
  • Banded Pleats reduce frequency of cartridge cleaning

Not Your Cartridge?

Is this not your Cartridge? Don't worry, we carry thousands of Pool Filter Replacement Cartridges to replace all of the most popular OEM brands such as Sta-Rite®, Pentair® / Pac Fab®, Hayward®, Purex®, American Products®, Jacuzzi®, Hot Springs®, Coleman®, and more. Click here for more Pool Filter Replacement Cartridges

Disclaimer:

All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.




Top End Cap Top End Cap
Bottom End Cap Bottom End Cap

Product Specifications

Manufacturer:
Pureline
Filter Model:
Hayward® Star Clear Plus C900
Filtration Area:
90 sq. ft.
Length:
17-1/4 in.
Diameter:
8-7/8 in.
Top Inside Diameter:
4 in.
Bottom Inside Diameter:
4 in.
Top Style:
Open
Bottom Style:
Open
Media Weight:
4 oz.
OEM #:
CX900RE
Unicel #:
C-8409
Filbur #:
FC-1292
Generic:
Yes
Top

?     Asked on 12/3/2015by Linda Smith

Is this the correct cartridge for Hayward C12002?
 Reply

A  Answered on 12/3/2015 by InyoPools Product Specialist Joe S.

Hello Linda, if you have the C12002 you will need CX1200RE. Original Hayward brand replacement cartridge for the C1200 Star Clear Plus filter.  Replace worn or damaged cartridges for optimal filter performance.
 Reply


?     Asked on 9/19/2016by Inyo Visitor

all the numbers on my cartrage is c-900-e which cartridge do i need
 Reply

A  Answered on 9/19/2016 by InyoPools Product Specialist Stacey M.

Hello, there are two options, you can go with Hayward C-900 & Sta Rite PXC95 Generic Cartridge (PA90) - NFC1292 which is our generic, or Hayward Star Clear Plus O.E.M Cartridge C-900 - CX900RE which is from manufacturer, both work for your filter.
 Reply


?     Asked on 3/8/2017by Inyo Visitor

Is is this made in the USA?
 Reply

A  Answered on 3/8/2017 by InyoPools Product Specialist Andy O.

Hello- This cartridge is not made in the USA.
 Reply


?     Asked on 4/24/2017by vicki

I need a new filter. The one in there now is a porpoise C8409 so I don't know which one I need. Could you help me please
 Reply

A  Answered on 4/24/2017 by InyoPools Product Specialist Stacey M.

Hello Vicki, the replacement for a C8409 is Hayward C-900 & Sta Rite PXC95 Replacement Cartridge (PA90) - PL0145. If you wanted original from manufacturer it would be Hayward Star Clear Plus O.E.M Cartridge C-900 - CX900RE.  The PL0145 is a generic version and less expensive, both will work for your unit C8409.
 Reply


?     Asked on 5/16/2017by CINDY

GOOD MORNING, CAN YOU TELL ME WHERE THIS FILTER WILL BE SHIPPING FROM. THANKS
 Reply

A  Answered on 5/16/2017 by InyoPools Product Specialist Patrick P.

Hi Cindy, This cartridge ships from Florida.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Filter was dirty and it was time to replace it

Written on 6/13/2021 by Guest

Released pressure on filter housing, unscrewed retaining nut.
Removed filter lid, exposing filter cartridge
Removed cartridge, installed new cartridge
Removed lid o- ring, cleaned lid of old lubricant..
Lubed new o-ring using Magic lube, installed o-ring onto lid, installed lid and tightened retaining nut.
Made sure o-ring was not pinched or caught in housing
Turned on pump, bled system until water flowed out of bleed port, tightened bleed port.
No leaks found
Spa was great, water is spotless.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Rubber hammer to loosen old filter ring and lid.

1     0

The old cartridge filter was worn out. The new filter was a perfect replacement.

Written on 6/3/2020 by Guest

1. First, I cut the power to the pump.
2. I opened the air vent on the top of the filter assembly to bleed the pressure.
3. I removed the old filter lid.
4. I drained all of the remaining water in the filter and then rinsed it out.
5. I put the new cartridge in the tank.
6. I put a new lid, ring and handles kit on the tank and then tightened the ring and air vent, replaced the tank drain plug and inspected the job for completeness.
7. Turned the pump power back ON and watched the new pressure gauge (part of the new lid and handle kit) and inspected for leaks. I noted the pressure and checked it again for leaks after the pressure stopped climbing.

Perfect and easy to do!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

2     0

My filter was tearing and needed to be replaced

Written on 4/11/2020 by Guest

Opened the Hayward filter and put the new filter in. Easy

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

My pool heater (heat pump) had a flo indicator on the display. It would not turn on.

Written on 2/22/2020 by Guest

Turn off electric from electrical panel. Replaced pool filter. Turn on electric from panel

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

Changing pool filter

Written on 10/1/2019 by Guest

Bought house in feb 2018. Didn't realize pool filter had to be swapped out about once a year. My filter was long past its effectiveness. Bought new filter cartridge. Unscrewed locking right on top of pool filter. Removed filter cap. Removed old filter. Installed new filter. Replaced filter cap and resealed locking ring. Turned on pool pumped, checking for leaks around filter seal. No leaks and we are good to go for another year. 10 min tops. Thanks again

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

previous filter was clogged

Written on 8/16/2019 by Guest

We noticed that our pressure wasn't dropping much after cleaning our old filter, plus the bindings were starting to give. It was time for a new filter. This couldn't have been easier to swap.

1. Turn off pump
2. release pressure valve at filter housing
3. Unscrew filter housing top
4. Pull out old filter
5. Insert new filter
6. lubricate filter housing gaskets
7. screw on filter housing top
8. Start pump
9. After water starts coming out pressure release valve, re-tighten it

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

just used my hand

Needed a Replacement Pool Filter

Written on 3/20/2019 by Guest

We took out the old one and put in the new one.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

No tools

As Good As the Original

Written on 3/7/2019 by Guest

Needed to replace filter. Inyo pool after market filter is as good as the original.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Needed a New Filter

Written on 3/3/2019 by Guest

Received the filter and it looked stronger and more durable than the one I previously purchased. I installed it, happy with it and working great.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

No Problem

Written on 12/27/2018 by Guest

I needed a new filter and I used the $5 off holiday coupon and it was delivered to my door in 2 days!!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Old filter was too clogged.

Written on 9/17/2018 by Guest

1.Release pressure from filter and remove filter cartridge housing cover.
2. remove old cartridge.
3. install new cartridge.
4. Replace Housing.
5. Prime pump if necessary.
6. Run pump, bleed air out. Tighten pressure relief valve.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

My cartridge was getting old and frayed.

Written on 5/30/2018 by Guest

Drained tank and opened top, took out old filter and replaced with new one. Water is clearer and the flow is stronger. Will keep the old one as a spare.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.79  out of 5 stars)
47 Rating
5 star:
 
(39)
4 star:
 
(6)
3 star:
 
(2)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews