PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE
Model # S7MD60
System 3 Modular D.E.
For cleaning, simply remove filter lid and hose off in place. No more hassle of tearing down the grid assembly for cleaning and servicing. The balanced flow design allows for a constant D.E. cake on the entire module and longer cycles between cleanings.
For More Sta-Rite Pool Filters
Pool size-16x30; 17,000 gal. Do I need 60 or 70 sq ft DE filter? Pump size: 2hp Max E Pro full rate P6R6G-208 L. Is this setup correct?
Reply
My psi sometimes rises from 18 to 22 or 23. The gauge and air pressure release has been cleaned and I have found some small pine needles in there. I am wondering if I am loosing pressure and need to replace the gauge, air release, etc. I am sure it is not from the filter basket or skimmer being blocked or full.
Reply
This article on How to Reduce High Pressure in Your Pool System goes over a good checklist of different things to check when you are getting high pressure. Also the comments on this article have some good nuggets of information. If this does not fix your problem then please email us back and we can dig a little deeper into your issue.
Reply
What is the recommended 2" multiport valve and doe sta-rite make a de recovery tank? I will be replacing a Hayward tank. Is there a discount / shipping promotion if I order all three?
Reply
Hi Ross, You would require the 2" Multiport Port Valve for the S7MD60 Filter here, and here is the Pentair Speration Tank you would require.
Reply
I need a "nut"/"collar" for the connection to the intake opening on my sta-rite filter. It is a S7MD60 filter. Where can I purchase this? Thank you.
Reply
Hi ScottishKnight, You will need the replacement Bulkhead Retaining Nut (24752-0050), Deflector Bulkhead Assy (23910-0101S) and O-ring (35505-1425). You can find other replacement part via the Sta-Rite Modular DE Filter S7MD60 & S7MD72 Parts Diagram.
Reply
The Most Helpful Review
2 1
(5 out of 5 stars) Best value for the money!
Reviewed By: jaymeister from montreal, canada ()
Pros: easy to install and maintain
Cons: none so far
Replaced an old jacuzzi brand sand filter with this and haven't had any regrets! Sparkling clean water, easy to purge air valve and simple filtration system make this a great buy. Filled it with less than recommended DE, as most manufacturers make you put in way too much, I put in 7lbs, as it works with the cartridge. Easy! A quality product, and you don't have to worry about hard to clean and fragile grid as in the DE models. Coupled this with a sta rite pump, and it's a charm!
Was this review helpful to you?
The Most Recent Reviews
1 0
(5 out of 5 stars) Sta-Rite Filter
Reviewed By: Don T. from Chattanooga, TN ()
Shipped very quickly and installation less than 20 minutes. New style Posi-loks are a real plus. Very please with filter.
Was this review helpful to you?