PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE

By Sta-Rite


Details

Top

Part # P6E6E206L

Alternate Part #'s PENP6E6E-206L, STA-10-302

Product Description

Inyo Recommended Pumps

MAX-E-PRO PUMPS By Sta-Rite

SUPERIOR HYDRAULIC DESIGN MOVES MORE WATER, RESULTING IN LOWER ELECTRICAL COSTS

This new high efficiency, low maintenance pump is designed for maximum performance for the modern pool. Advanced state-of-the-art hydraulics means that Max-E-Pro delivers more water resulting in lower electrical costs. It will keep your pool crystal clear as well as run your automatic cleaner and any other hydraulic accessories around your pool. Not only is this pump energy efficient, it is ultra quiet. Special dampening in and around the pump’s base makes Max-E-Pro one of the quietest pumps in its class.



The extra large 6” trap collects more debris, allowing you to clean the trap less often. Our clear see-thru lid allows you to check for debris without removing the lid. The new Quick-Lock trap cover ring makes loosening or tightening the trap a cinch. Max-E-Pro is self-priming and produces enough suction to lift water 5-feet above pool level. Large 2” ports include external and internal threads to adapt to a variety of pipe sizes.

The Max-E-Pro is built to last, constructed of Sta-Rite’s glass reinforced resin that is corrosion-proof and can withstand many years of U.V. sunlight. This season, invest in the energy efficient, low-maintenance pump that really moves the water – Max-E-Pro by Sta-Rite. 110/230V UL Listed and NSF. Backed by a 1-Year Warranty.



 

Product Specs:

  • Voltage = 115/230
  • Max. Load Amps = 16.0/8.0
  • Horse Power = 1
  • Pipe Size = 2"

Click here for more Sta-Rite Pumps

Product Specifications

HP:
1 HP
Speed:
Single
Volts:
115/230 V
Amps:
16/8
Port Size:
2 in.
Service Factor:
1.65
Union Connectors:
Not included
Top

?     Asked on 12/29/2014by alonzo doggett

I have a sta-rite max e glas 1hp pea5e-181l pool pump, will the max-e-pro fit in with the same sizes (physical size out-put as my pump? I have not been able to find one the same as my good old one tk you, Al
 Reply

A  Answered on 12/30/2014 by InyoPools Product Specialist Charlie R.

Because the Sta-rite Max e Glass is no longer made, I am unable to find the overall dimensions of this pump. However, we do have dimension of the Max-E-Pro. Depending on the exact model you buy, the overall length averages about 26" and the overall height is approximately 14.2", with a 2" intake and out take.
 Reply


?     Asked on 5/12/2015by Bill Albright

How do I figure "total head" and gallons per minute for a Stay Rite max e pro p6ea6e205L?
 Reply

A  Answered on 5/12/2015 by InyoPools Product Specialist Lennox H.

Bill, You can use the flow chart that is located in the product description to see the GPM to total head this pump can generate.
 Reply


?     Asked on 9/3/2015by Dave

My pool is 22,000 gal, 75 FoW, 1 1/2 in pipe. I replaced an old 1 hp. Sta-Rite pump (looked like the Max-E-Pro style), with a 1 hp. Pentair Superflo. Doesn't pull hard enough to clean pool and died after 3 yrs. Would like to go back to the Sta-Rite but the Max-E-Pro owners manual says not to attach anything smaller than 2 in. to the 2 in. suction inlet. Am I stuck with buying a pump with 1 1/2 in. fittings?
 Reply

A  Answered on 9/9/2015 by InyoPools Product Specialist Lennox H.

Hi Dave, You can use a reducer but it would be better to get a pump that can fits your pipe size.
 Reply


?     Asked on 5/31/2016by Bob

Is this a good combination for a 24,000 gal pool with equipment located about 40 feet from pool skimmer return: 1. Max-Pro-E (1 horse pump) (Model#P6E6E-206L) 2. System 3 Cartridge filter (what size?/is there a valve needed between pump for waste, etc?) 3. Max-E-Therm LP Heater (what size?) 4. Intellichlor/with pwr supply (what size?)
 Reply

A  Answered on 6/5/2016 by InyoPools Product Specialist Lennox H.

Hi Bob, I would recommend the Max-E-Pro P6EA6E205L, System 3 Mod Media Cartridge Filter - S7M400 does not require a valve, Max-E-Therm - SR333LP or SR400LP and the Intellichlor IC40.
 Reply


?     Asked on 7/27/2016by Inyo Visitor

i have a 36000 gal Inground pool the pump I have now is 1 hp 230 v is this a good pick
 Reply

A  Answered on 7/28/2016 by InyoPools Product Specialist Scott W.

Hi Scott, yes the max-e-pro is a great pump and if what you have already is a 1HP and it had been doing the job then I wouldn't switch unless you plan on adding extra water features in the future that will require an increased flow rate.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
11 Rating
5 star:
 
(11)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews