By Raypak
Model # 009203
Warranty 1 Year
Manufacturer Code P-R406A-MP-C #57
PLEASE NOTE: THIS IS A STOCK PHOTO. THE MILLIVOLT HEATER DOES NOT HAVE A DIGITAL DISPLAY/READOUT.
BENEFITS:
Dial control for temperature selection and heater settings
Capron resin headers prevent rust stains from harming pool surface
Plumb directly from provided 2" PVC threaded union
Smart microprocessor controls diagnostic read-out and continuously monitors operating status
Completely field serviceable
Small footprint
High efficiency
Guaranteed high wind reliability
Looks smart and works smart
1 Year Warranty
Thermal Efficiency of 83%
California Customers Please Note: South Coast Air Quality Management District ( SCAQMD) Area of Jurisdiction REQUIRES a Low Nox Heater be installed. The following 6 California Counties are affected: Los Angeles, San Bernardino, Ventura, Orange, Riverside, & Kern. Installing a non-compliant heater in these counties will void the manufacturer's warranty and could result in a fine from your local code enforcement.
Click here for RayPak Low Nox Heaters
Elevation: 0 Ft. – 2000 Ft. Click Here for High Altitude Pool Heaters
Dimensions:
Can you provide me the dimensions for the Raypak RP Series model PR406AEP? What size gas line does this heater use?
Reply
The Raypak 406 BTU RP2100 Series the cabinet measures are as follows: Width - 29 inches, Depth - 28 inches, Height - 38 inches. the gas line needed for the 406K BTU is a 3/4 inch. Any further technical data like voltage be found in the Raypak Specifications Guide
Reply
How do I calculate the size of heater needed ?
Pool is 11 x 4 x 1.5 metres, in sub-tropical location...
thanks
Reply
If you are trying to heat the pool only and you do not have a hot tub to heat I recommend a heat pump over a heater. It is going to be more cost efficient.
Reply
Is this pump good for hard water?
Reply
Hi, Angela. This is a gas heater, not a heat pump. Hard water is bad for your pool equipment. Heat Pumps can with hard water conditions because it has a titanium heat exchanger, you will want to get a gas heater with a cupro-nickel heat exchanger like model # 014953 which is an electronic unit.
Reply
RECEIVED POOL HEATER MODEL 009203. IS IT CONVERABLE TO NATURAL GAS, AND WHAT IS REQUIRED?
THANK YOU
Reply
Can this be used with propane?
If I ordered today what delivery time to Maryland?
Reply
Hi Paul, yes this is a propane heater and has an approximate delivery lead time of 3-6 business days.
Reply
