Part # 261152
Dimensions 18" L x 9" W x 6" D
Alternate Part #'s 27507-200-000, SM2-PP2, PEN261152
MULTIPORT Backwash Valves for D.E. and High-Rate Sand Filters
This 2-inch side-mount MPV is rated at 125 GPM. Top mount valves are available in 1-1/2-inch 8-position or 2-inch 6-position. All Multiport valves are constructed of molded ABS material with heavy-duty plastic handles and are 100% factory-tested. 7.5" Centerline for intake and discharge ports to connect to bulkhead fittings.
Additional features include:
125 GPM (2 inch side mount)
Durable lever action handle for simple operation
Water-resistant rotor for long life
Threaded or socket ports to fit a variety of D.E. or sand filters
Sight glass included
100% factory tested
One-year Warranty
I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
Reply
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
Reply
please tell me, are the two connections which go to the DE filter adjustable when the valve is purchesed or are they fixed? my anthony filter has an 8 inch center to center distance but nowhere do i see distances specified.
Reply
Hello Joe - The plumbing connections cannot be changed on the 261152 valve. You may want to checkout valve model 4702P. This is a complete valve body without the plumbing connections. You can plumb this valve to match your Anthony filter.
Reply
I have a Pac Fab Model MS-20-2 Serial number 2916 5112 multi port value that has failed. It is used on a Nautilus NS-60 DE filter. Is this value plug and play for the old value, and/or do you recommend getting a new filter at the same time?
Reply
Mr. Arnold, If you're planning to replace the entire filtration system, then it will be netter to do it at the same time. In the meanwhile you can replace your multiport valve with this one and it can also be used on the newer Pentair D.E. Filters.
Reply
Is the input and output connections from the pool threaded or glued on the 261152 valve? I don't seem to be able to find a picture anywhere.
Thanks
Reply
Which port is which? The two ports that attach to the filter are obvious, but I can't see if the others are labeled. Which is the in (from pump) port? Which is the out (to pool)? And which is the backwash/drain port?
I'm guessing backwash is the one by itself and on the two port side the inlet is the top, outlet is the bottom to match filter ports? Thanks
Reply
Hi Chris, All of the ports on the 2" Multiport Valve Threaded for D.E are labeled so that installation is done correctly. The port on the right on the opposite side will labeled "pump", the "return" port will be back to the pool and "waste" would be backwash.
Reply
1 to 2 hrs
Socket Set, Wrench Set
4 0
My multi-valve was 15 years old. Changed the spider gasket years ago. Didnt want to do that again. Purchased a new multi-port valve. Used the do it yourself guides and forums on Inyopool.com to install it. Had to change out the PVC pipes to and from the valve. Took a couple of hours but wasn't too bad.
$1,249.00
$1,309.00
The Most Helpful Review
2 0
(5 out of 5 stars) Smooth DE valve
Reviewed By: Lou J. from Dallas, TX ()
Pros: Great website; comparable prices
Cons: none
Bought this backwash valve to replace my dated one that was 13 years old. It is working great. Hope to get another 10 plus years out of this one. Used inyo because of the diagrams on info and details on website.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Was easy to install.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Rick G. ()
This updated multi-port valve fit my 17 year old FNS plus filter perfectly.
Was this review helpful to you?
(5 out of 5 stars) Great
Reviewed By: Inyo Customer ()
Great, have it up running 4 years now. No problems whatsoever. Way better than the old needle valve. Great for draining mass amounts quickly. Backflush and rinse work well too.
Was this review helpful to you?
0 1
(5 out of 5 stars) Excellent product, outstanding service.
Reviewed By: wendysmac from Baltimore , MD ()
Pros: Multifunctional valve, this makes pool care very easy and far more economical (in time and cost) than standard backwash feature on older filter. I can run skimmers without filtering, lower pool level
Cons: I've not discovered any cons.
Inyo Pools provided knowledgeable information and prompt service.
Was this review helpful to you?