PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE

By Pentair Pool Products


Details

Top

Part # 460935

Alternate Part #'s PEN460935

Product Description

UltraTemp ® High Performance Heat Pump 



Simply the most economical way to heat your pool and spa. With today's record energy costs, there's never been a better time to invest in a heat pump. Compared to gas, oil or electric heaters, UltraTemp uses just a fraction of the energy to generate the same amount of heat.

An Eco Select ™ Brand: UltraTemp ® High Performance Heat Pumps transfer heat from the atmosphere to the pool or spa, saving up to 80% in energy costs compared to gas-fired heaters. Plus, they are the only heat pumps available that use R-410A refrigerant, EPA-recognized as environmentally safe and clean.

 

  • 100% titanium heat exchanger assures corrosion-free performance for extra long life and value.
  • LCD control board displays an intuitive, menu-driven readout with easy to follow, full word messages - no more codes.
  • AutoSet (time clock over-ride) feature monitors water temperature and turns the water circulation pump on and off as needed to maintain desired pool termperatures
  • Automatic defrost feature senses refrigerant temperature and prevents UltraTemp from freezing, allowing the heat pump to operate at even lower temperatures
  • Compatible with All automated control packages
  • Long-life corrosion resistant plastic composite cabinet stands up to severe climates and pool chemicals
  • Emerson Copeland Scroll Compressor
  • ETL listed for safe operation
  • Thermostatic Expansion Valve (TXV) controls refrigerant flow for optimum effciency and BTU output over a wider operating range
  • Highest effciency available, meets or exceeds existing codes and standards
  • BTU and effciency performance independently certified by the Air-Conditioning, Heating and Refrigeration Institute, AHRI







For More Swimming Pool Heat Pumps

Product Specifications

BTU:
127,000 H/71,000 C BTU
Heat Exchanger:
Titanium
Compressor:
Scroll
Phase:
Single
Volts:
230
Hz:
60 Hz
Recommended Breaker Size:
50
Wire Size:
8
Special Feature:
Heat/Cool
Top

?     Asked on 7/12/2015by Inyo Visitor

The sales brochure states that there is a 10 year warranty on compressor parts and labor and a lifetime warranty on the titanium heat exchanger. Since you guys are using the sales brochure on your sight, I am assuming that you honor this warranty?
 Reply

A  Answered on 7/12/2015 by InyoPools Product Specialist Alex V.

Hello, The warranty is handled directly through the manufacturer. If you have a warranty issue, you will need to contact Pentair with the proof of purchase and proof of installation.
 Reply


?     Asked on 7/12/2015by Inyo Visitor

I haven't ordered this product yet. If I order from your company, will Pentair honor the warranty? Are you guys a Pentair distributor or do I have to purchase from Pentair directly to receive the warranty?
 Reply

A  Answered on 7/14/2015 by InyoPools Product Specialist Joe S.

Hello Yes we are a Pentair distributor for all Pentair Products. Having it installed by a certified installer will no void the product. So you will have full manufactures warranty
 Reply


?     Asked on 9/8/2016by erick

I have a commercial pool 65000 gallons I need 2 of these units how many GPM and also im in the desert 112 degres how much cooler will it drop if they run 24/7
 Reply

A  Answered on 9/9/2016 by InyoPools Product Specialist Scott W.

The minimum flow rate is 30 GPM, the maximum is 100 GPM. As far as cooling the water, it will do about 5-8 degrees in the hot climate that you live in. I use to live in Coachella Valley and that was about what my chiller would do.
 Reply


?     Asked on 7/22/2019by Inyo Visitor

I have a 21K gallon inground pool on Maryland's eastern shore. How do I know if I need a model 120 or 140 or any other model?
 Reply

A  Answered on 7/23/2019 by InyoPools Product Specialist Hector F.

120k BTU's or 140 are suitable for your application, however, using a 140k BTU model will not work as hard and would heat the body of water quicker. 
 Reply


?     Asked on 7/31/2019by Rick

We currently have a two year old 460933, in commercial use in an RV park 40,000 gal. pool. However we are in the desert and experience water temps in the mid 90's in the summer. I'm guessing their is no economical way to add cooling to the 933. If there is please recommend the proper add on equipment. If not would the 935 be the right upgrade to provide cooling capability down to 82 to 84 degrees?
 Reply

A  Answered on 8/1/2019 by Industry Professional

Hi Rick, There is no way to add on Heat Cool to your current unit. The best thing would be to purchase the 460935
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
2 Rating
5 star:
 
(2)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)