PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE
By Jandy
Part # SHPF15
.png)
Quiet, Powerful, Efficient
The Stealth is a professional-grade pump that combines superior performance with energy-saving efficiency and “Quiet Technology,” making it the most efficient single- and two-speed pump available. The Stealth is easy to install and contains the largest trap basket on the market for easy routine maintenance.
Features:
Specs:
Is it advantageous to increase the horsepower from 1.5 to 2 or possibly 3 considering I have to replace my current pump which has failed? The pumps feeds a 24,000 gallon in-ground pool with a Jandy DEV60 Diatomaceous Earth filter on the return.
Reply
Stephen, Normally a 1-1/2 HP pump would be more than sufficient for a 24,000 gallon pool unless you have other water features like waterfalls, solar or spa jets. By increasing your horse power you will be paying more to operate your pump as the larger HP pumps cost more to operate. Also you would want to make sure your filter could handle the increased output of the pump, since you have a DEV60 which is a pretty big filter this would not be a problem. My general reccomendation would be to stay with the 1-1/2 HP pump on a 24,000 gallon pool.
Reply
I just replaced the motor and now I might need a new pump. Can I order just the pump without the motor. I ordered the motor about 18 months ago from your company. The pump is a jhp 1.5 stealth serial#106FC3630.
Reply
Doug,Unfortunately, you cannot order a pump without the motor. You can purchase individual parts for your pump (ie. your motor, impeller, diffuser, housing) but the mfg does not sell just the wet ends of the Jandy pool pumps.
Reply
Our jandy SHPF1.5-2 pool pump, almost 3 years old, just blew the Start capacitor (25UF) 2.5 weeks ago, the warranty repair guy replaced with 50 UF Cap. It worked until yesterday the pump made a humming noise then shut off. I hit breaker and let sit for 20-30 min turned breaker on tried to start pump on slow speed and smoke and burning smell from motor I immediately turned breaker off. It appears the pump motor is seized or broke, could this be due to 50UF instead of 25UF
Reply
Hi Jerry, Replacing a 25uf with a 50uf capacitor will not cause the motor to burn up like it did. It could have been something eternally tht shorted out the motor. At this point, you will have to replace the entire motor with the B2983 or pump.
Reply
I need to replace a Stealth Model SHPM1.5, 1.65 Total Motor HP Pump. Please let me know if it is available and the price. My current pump has a crack and cannot be fixed.
Reply
Hello Joyce, the SHPF would no longer be available. We would recommend the Waterway Champion 1.5 HP Max Rate Pool Pump - CHAMPS-115.
Reply
I have this Jandy SHPM 1.5. I need to replace the motor that is attached to it as it is not working. Attached is a photo of the motor sticker with all the info. Can you recommend a replacement motor and whatever seal kits I need to make it work? Thanks. It is a century motor.
Hello Adam. The Century Motors 1.0 HP Full Rate Motor model B2841V1 is a compatible replacement motor with an energy-efficient rating. Century 1.0 HP Square Flange 56Y Full Rate EE Motor - B2841V1 The Century Motors 1.0 HP Full Rate Motor model B2848 is a compatible replacement motor. It is recommended that the motor shaft seal, backplate o-ring, and diffuser o-ring be replaced concurrent with the motor. Jandy Pump Shaft Seal 5/8" - R0479400 Backplate O-Ring, Generic - R0446300 9-1/2" ID, 3/16" Cross Section O-521 Diffuser O-ring - R0622000
Reply
