$150.74

Qty:

By Intermatic


Details

Top

Part # P1131

Alternate Part #'s ITMP1131

Product Description


Heavy Duty Outdoor Timer P1131 for pumps with twist lock cords

This Portable Outdoor Timer is specially designed to control the filter pump of a portable pool or spa. They can also be used to turn ON and OFF outdoor decorations, engine block heaters and other appliances - indoors or outdoors. This timer is specifically designed to work with pumps up to 1 HP with twist lock cords.

Product Specs:

120 Volt
Case – 5” high x 5-1/2” wide x 3-3/4” deep
Cord – 3 wire, outdoor grade, 22” long
Timer – 24 hr. with 23-1/2 hr. maximum ON time.
Switch Rating – 20 Amp resistive or tungsten
Agency Approval – CSA/C-US

For Additional trippers (2 "ON" 2 "OFF" per pack), order No. 156TN10398A

Product Specifications

Cord Length:
22 in.
Timer:
24 Hour
Volts:
120 V
Cord Type:
Twist Lock
Top

?     Asked on 6/5/2006by Guest

I have a twist lock plug on my filter. I am assuming that you can plug in this type of plug into the timer? Also my filter is a 1.5 HP and the specs say it is good for 1 HP. Can I use this or is there another model that will work?
 Reply

A  Answered on 6/5/2006 by InyoPools Product Specialist Patrick P.

This timer is designed specifically for pumps with a twist cord, however it can only handle pumps up to 1.0 HP. We do not have a timer available for twist lock pumps over 1.0 HP.
 Reply


?     Asked on 6/18/2006by Guest

I have a 1 1/2 HP Hayward filter, I need a timer box that I can connect to it. Will this handle it or do you have another timer that might?
 Reply

A  Answered on 6/18/2006 by InyoPools Product Specialist Patrick P.

This will only accommodate up to 1.0 HP pump. If this is for an above ground pool pump then you could use the following timer SP1500FT http://www.inyopools.com/Products/02200022032590.htm
 Reply


?     Asked on 7/13/2006by Guest

Is the the plug or the receptacle twist lock?
 Reply

A  Answered on 7/13/2006 by InyoPools Product Specialist Patrick P.

The recptacle on the timer is designed to accept a twist lock plug and the plug coming off of the timer is also twist lock. So both the receptacle and plug are twist lock.
 Reply


?     Asked on 12/11/2006by Guest

Can this timer be mounted to a wooden receptacle post?
 Reply

A  Answered on 12/11/2006 by InyoPools Product Specialist Patrick P.

According to Intermatic, the P1131has a keyhole on the back which will allow it to be mounted to a post with a screw or nail.  They recommend mounting the timer at least 1 foot above any standing water or snow.
 Reply


?     Asked on 6/1/2008by Guest

How long is the cord on this timer?
 Reply

A  Answered on 6/1/2008 by InyoPools Product Specialist Patrick P.

The cord is 22 inches long.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Drill

Could not find a timer for a twist lock plug.

Written on 9/21/2020 by Guest

I wanted to add a timer to my pool pump, I ordered the hard wire one and then found this one on your web site. It is working excellent and was so easy to hook up. Its as easy as mount with two screws and plug it into the outlet and then plug the pump into the timer and then set the timer. Works great!! And you can turn you pump on and off from the timer.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.5  out of 5 stars)
8 Rating
5 star:
 
(7)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(1)

The Most Helpful Review


The Most Recent Reviews