Part # IDXL2ICB1931
Dimensions 7" L x 5" W x 4.5" D
This integrated control board is designed to use with Hayward Universal H-Series Low NOx induced draft heater models H250IDL2, H350IDL2, H400IDL2 and also compatible with Hayward Universal H-Series Low NOx induced draft heater. New part incorporated on all IDL Heaters built after 9/20/04.
My Hayward H400IDL heater flashes "SF" and he heater is not heating properly. Hayward. Hayward says it is my heat senor. If I replace my control board will this be the fix?
Dean
Reply
Hi Dean, If the temperature sensor is not bad as the "SF" error code indicates then it could be a defective board. I would have a service technician inspect the unit to be sure.
Reply
Will this boar work for an H350?
Reply
Hi. This Integrated Control Board - IDXL2ICB1931 is not compatible with an H350 Heater model.
Reply
a local pool company told me that i need a new circuit board and a new blower in order to fix my h400IDL heater. All i can find are mainly parts for h400idxl . what is the difference and are the parts that i need interchangeable ?
Reply
Hi, Stecve. None of the H-Series Low NOx model numbers ends with IDXL. You're getting the replacement part number and the mixed up
Reply
My heater Hayward h250 when turned on lights up service light and automaticity comes up HF error code checked voltage at gas valve there is no power going to it is there anything else to check or does that mean the board is bad
Reply
Since you're not getting 24 VAC at the gas valve, you will have the replace the Integrated Control Board based on your model.
Reply
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Susanne C. ()
No problem replacing it and got heater working again!
Was this review helpful to you?