By Aqua Cal


Details

Top

Part # SQ166R

Manufacturer Code SQ166ARDSBNP

Alternate Part #'s APLSQ166ARDSB, AUTSQ166ARDSBNM

Product Description

hwsq_logo1

All of the HeatWave SuperQuiet® Heat Pumps are fully tested and certified by AHRI. Making the right choice just got a whole lot easier. Some of the HeatWave SuperQuiet® models are ICEBREAKERS®, which heat and cool the pool. The ICEBREAKER®units extend the swimming season longer than any other heat pump by continuing to operate in low temperatures.

Features

The only heat pump that allows you to maximize the potential savings of a variable speed pump is an AquaCal®, which utilizes our patented ThermoLink® Heat Exchanger technology with its unique flow characteristics.

  • Patented hydraulic design adds only 1 PSI at 30 gpm, increasing compatibility with two-speed & variable speed pumps.
    Saves money when using a variable speed pump by reducing the RPM needed to achieve the same flow rate.
    Save money in a single speed pump application by reducing the run time needed to achieve the same turnover rate of the pool.

Corrosion Proof Cabinet  

  • Louvered side panels protect evaporator coil while ensuring efficient air flow
    Rust and fade proof
    Impact resistant
    Built-in drain pan provides condensate management

AquaTop

  • Air Flow Vectoring Top protects internal components from weather and debris while ensuring optimal air flow

Microprocessor Controlled  with Digital Display

  • Flip-out control panel is out of sight, protected against sun and weather
    Lockable panel provides security from others changing the temperature
    Accurate and easy-to-read bright blue display
    On-board self diagnostics
    Microprocessor controlled defrost cycle

ThermoLink®  Titanium Heat Exchanger

  • Patented counter-flow water management system
    Patented hydraulic design adds only 1 PSI at 30 gpm, increasing compatibility with two-speed & variable speed pumps
    Impervious to chemical corrosion
    Durability without sacrificing performance
    Lifetime warranty

Additional Feature

IceBreaker® Technology: Heat & Cool Models

  • Extends swimming season longer than any other heat pump on the market
    Continue to heat at freezing temperatures to minimize heat loss
    Cool your pool to a refreshing temperature
    Set to heat, cool or autotemp

Product Specifications

BTU:
126,000 BTU
Heat Exchanger:
Titanium
kW:
6.6 kW
Volts:
208v-230v
Hz:
60 Hz
Phase:
1
Minimum Circuit Ampacity:
42.1
Recommended Breaker Size:
60
Min Flow Rate:
30 GPM
Max Flow Rate:
70 GPM
Dimensions:
34" L x 42" W x 43" H
Weight:
328 lbs.
Compressor:
Scroll
Manufacturer:
AquaCal
Heater Type:
Heat Pump
Top

?     Asked on 3/20/2017by Peter Adelfio

Hey, are you guys going to start carrying the AquaCal SQ225 anytime soon?
 Reply

A  Answered on 3/21/2017 by InyoPools Product Specialist Alan M.

The AquaCal Heatwave SuperQuiet SQ225 Heat Pump 143,000 BTU is available for special order.
 Reply


?     Asked on 6/19/2017by Joe c

I recently purchased heat cool pump SQ 166r My pool has direct sun all day I live In South Carolina I cannot get the water temp down to 85 during the day,,, Any suggestions?
 Reply

A  Answered on 6/28/2017 by InyoPools Product Specialist Lennox H.

Joe, You may have to run the unit longer and especially at night to get the water temp down.
 Reply


?     Asked on 7/14/2018by Bob

i have a old aqua cal heat pump and it never did the job of warming the pool water in a reasonable amount of time.Also had many break downs on it as to now its been disconnected for some years now. My pool guy just suggested the SQ166R for a heater. We have a 30,000 gallon pool that is in the shade most of the day. What are your thoughts?
 Reply

A  Answered on 7/14/2018 by InyoPools Product Specialist Lennox H.

Hi, Bob. This unit is a great unit and AquaCal is a highly reputable company. To confirm if this unit will be adequate to heat your pool to your needs, use the AquaCal Sizing Estimator to enter in all variables. 
 Reply


?     Asked on 4/16/2020by Tadd

Hi! What is the best way to find a plumber and electrician to install a heat pump? Also on the AquCal heat/cool pumps will it void the warranty if anyone other than an authorized distributor installs it?
 Reply

A  Answered on 4/16/2020 by InyoPools Product Specialist Hector F.

You can locate a CPC(certified pool contractor) in your are online and these heat pump manufacturers do advise these units are installed by a qualified technician or the warranty may be voided if there is ever an issue with the unit.  
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)