Part # SN1302
Warranty 1 Year
Manufacturer Code SPX1630Z1BNS
Dimensions 15.5" L x 6.5" W x 6.5" D
Full rated 3.0 HP motor; 3450 rpm, 208-230; 20.6/19.0 full load amps; 1.60 service factor; 56J frame
Note: NOT California Title 20 Compliant.
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
Why do I need to purchase a new shaft seal?
Reply
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
Reply
Why should I purchase a Tune Up Kit?
Reply
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
Reply
I'm trying to find a replacement motor for my pool pump but my model number doesn't match what you have listed as the model number. My model number begins with a C48 and yours begins with an SP. Please help.
Reply
What we have listed on our chart pages is the pump model number. The model number you have will just identify the motor. If you look on the plastic housing on the pump there should be a sticker which will have the pump model number. You can usually find this by the discharge port on the pump. Once you locate it you can choose the correct replacement motor. Be certain to change the shaft seal and gaskets as needed. You can use our >How to guide if you need help.
Reply
sn1302 3 hp northstar motor. 56J What bearings do I need and are there 2 ?
Reply
The Most Recent Reviews
(5 out of 5 stars) CENTURY PUMP 3.0
Reviewed By: Inyo Customer ()
THE CORRECT PUMP FOR THE JOB, FAST SHIPPING, AND SERVICE THANK YOU
Was this review helpful to you?
(5 out of 5 stars) Great Motor
Reviewed By: Inyo Customer ()
Exactly what I needed. Going strong in the second year now.
Was this review helpful to you?
(5 out of 5 stars) Works great
Reviewed By: imau from texas ()
Easy install and works great. Best price found on all websites checked. Would buy again if had to.
Was this review helpful to you?
(2 out of 5 stars) Defective
Reviewed By: Dave W. from Eynon PA ()
Motor did not work at all from factory, only reason for two stars is that inyo got a replacement shipped fast. Thanks inyo
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: scotqb64 from Dallas, TX ()
Pros: Easy to install and very good price
Great match to original motor and easy to install.
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Ecrow from Dallas, TX ()
Pros: Does what it needs to do.
This motor was exactly what I needed for my pool, and much cheaper than what I could purchase locally. The first one I ordered broke down after a few months, so I am hoping this one is more reliable. So far so good. Also, INYO sent me this new motor at no additional charge.
Was this review helpful to you?
(5 out of 5 stars) Great product easy to install!
Reviewed By: Spaceytracey from Murrieta, Ca. ()
Great product and was easy to install! Shipping was fast and well packed!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Kevin from Roseville, CA ()
Pros: OEM replacement, good price
Cons: Had to buy whole impeller kit to get shaft seal.
Great delivery. Ordered Labor Day (Monday) and it was delivered Wednesday. Installed easily. Good website. I had problems on other sites trying to determine what motor and parts I needed. Inyo site was clear and easy.
Was this review helpful to you?
203 12
(5 out of 5 stars) Excellent Pump Moter Replacement
Reviewed By: PoJo from Clarence, NY ()
Pros: Awesome fit - excellent replacement
Cons: none
Tip to get the impeller off the old pump moter: use a 7/16" open ended wrench - it slides in near the capacitor on the electrical side... rotate the impeller until the wrench slides into place at the end of the shaft and then one person holds the motor and the wrench while a 2nd person loosens the impeller off with bare hands by turning the impeller counter clock-wise.
Was this review helpful to you?