Model # PL1601
Warranty 1 Year
Same Quality as Hayward®, Pentair®, Sta-Rite®, Jandy®, Jacuzzi® & Waterway®!
The PureLine Pure Flow pool pump is one of our favorite pumps. This work-horse is designed to be energy-efficient, quiet, dependable and all of this at a great price.
Click here for 1.5" Quick Disconnect Unions for the Pure Flow Pump
Click here for 1.5" MIP, 2" Socket Long Union for the Pure Flow Pump
Click here for the Above Ground Pool Version of this Pump
Application
Features
Dimensions
Pump Curve
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
what is the warranty on the 1.5 hp reliant pool pump and the two speed pump. Also is the reliant motor the same as the Hayward super pump
Reply
The warranty on this pump is a 1 year warranty. The reliant motor is made by a different manufacture than the manufacture of the Hayward Super Pump.
Reply
We have a 16 x 34 pool. Currently have a 1 1/2 HP pump which is very old. It came with the house we bought. Would this pump be big enough for that size pool.
Reply
Hi Kathy, Yes this pump would be large enough for your 16 x 34 pool.
Reply
I have a Hayward Northstar Pump, Part No. 187629.02. Is this pump a suitable replacement?
Reply
Hi Noshir, This pump would be a little too small for replacing a Hayward Northstar Pump. A good replacement for your Northstar would be the 1-1/2 HP Jacuzzi Magnum Pump.
Reply
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, sawsall, channel locks, wire cutter
1. ordered new pureline pump and quick connector unions from inyo through chat (techs very helpful)
tool old pump out (cut off breakers / removed old wiring / cut existing pvc with sawsall)
2. installed quick connectors to new pump / matched new pvc to existing setup / primed and glued all pvc.
3. connected electrical (3 wires)
4. connected quick connect unions to pump / turned on breakers / pump working great.
Less than 1 hr
Screwdriver, Pliers, Strap wrench for unions
Ordered the pureline pump,got it in just a few days unhooked the unions on my super pump and unwired it, the new pump fit right in by using the plumbing off old pump,took about 45 min.to plumb and wire it up worked great. The only problem was the pipe threads are not American, had to wrap a few extra rounds of Teflon tape to get a tight fit
2 to 4 hrs
Screwdriver, Socket Set, hack saw to cut and refit the PVC, and glue.
1 0
Ordered this pump at a great price and fast shipping. The only problem was the pipes on my old pump were 2 inch and the new pump was 1.5 inch.... A detail I did not realize until it arrived. I called the support team and they confirmed the change in pump size was not going to be a problem.
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set
I received my pump by UPS. The box looked good so I did not inspect. Went to install pump and the electrical cover on the motor was damaged. I took pictures and emailed INYO requesting a new cover... no reply as of today. I installed the pump and it works fine.
It took me a few trips to the hardware store to get the right fittings but got it done. After further review of the website I saw the fittings I needed. It would have been nice for that info to be listed as a needed accessory. SO-97336 1001645 David
1 to 2 hrs
Screwdriver, Nut Drivers, Wrench Set, Adjustable Wrench
2 to 4 hrs
Screwdriver, Pliers, Socket Set, Wrench Set, hacksaw
14 0
I found great support for reviews and products at www.inyopools.com! I found a comparable pump in gallons per hour (GPH) and horsepower (HP). I selected a 1.5HP and had it shipped! Once the pump arrived, I set up to get it installed. First step is to always secure power by turning off the circuit breakers. Then, I removed the old pump by cutting the supply and return lines to the pump and disconnecting the electrical wiring. Once the old pump was out of the way, I placed the new pump in place. With it properly located, I measure the PVC pipe I would need to connect the new pump, made the appropriate cuts and prepared to assemble the pieces, which included two unions and the 1 3/4" to 2" male adapter for the pump itself. Using PVC primer and glue, I applied the primer, then the glue, to each connection working towards the pump. Once the male adapters were attached to the pump using plumber's tape, I then connected them to the rest of the PVC pipe fully connecting them in less then 20 minutes. After the plumbing was completed, I connected the wiring using the provided instructions on the inyopools.com site, which was extremely helpful! Once all connections were complete, I reapplied power and verified there were no issues. Using a 5 gallon bucket, I filled it with water from the pool, opened the filter basket on the pump itself and used the bucket to fill up the pump. Once there was water in the pump, I turned the pump on and systematically added water with the filter basket open until the pump began circulating water on it's own. I closed the filter basket lid and the pump filled completely. I bled air out of the filter system and that finished up the project! No leaks, no issues, and a pretty easy install. Great supporting documents and how-to's were provided by www.inyopools.com and made the job even easier.
The Most Helpful Review
28 0
(5 out of 5 stars) Replacement in ground pool pump
Reviewed By: Joseph O. from exton Pa ()
Pros: very well made
Ordered this pump to replace a Marlow pump no longer available. Very good delevery service and had the pump in 4 days from order. Installed the pump by replaceing two fittings.Up and running in a matter of a few hrs. Pump is very well made with access for wiring. Will be back to Iny pools nxt time I need pool equipment
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
This pump and motor assembly is awesome. I (my fault) burned it up yesterday and purchasing a new one today.
Was this review helpful to you?
(4 out of 5 stars) Lasted just under 4 years.
Reviewed By: Inyo Customer ()
I had the pump for just under 4 years with no issues until it died. I think it was the motor because it was very hot after it quit working. I thought it should have lasted longer than four years but that's just my opinion. It did operate properly when it was working. I ended up going with a different brand to replace it.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
work great / matched up perfect due to my old pump model not being available
Was this review helpful to you?
(4 out of 5 stars) My Pureline pump
Reviewed By: Inyo Customer ()
Had the pureline pump a few weeks now and it’s doing a great job so far.would have given 5 stars but the 1&1/2 threads are not American they must be metric or something had to use extra Teflon tape to get a tight seal
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
This pump was 1/4 the cost of the Pentair I replaced. It works just as good! Very happy with it.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Love this pump for the price and easy installation. This is the third one of this same model in nine years. Great value!
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Awesome product. Wish it had a gokit for it
Was this review helpful to you?