Part # PL0113
Dimensions 7" L x 7" W x 25.5" D
Pureline 112 Sq. Ft. Replacement Cartridge | Compatible with Hayward® SwimClear CX875 Filter | PL0113 Maintain Clean & Clear Pool Water
This aftermarket replacement cartridge offers 112 square feet of filtration capacity to help remove dirt, debris, and oils from your pool water—supporting efficient system operation and healthy swimming conditions.
✅ Compatible With:
Hayward® SwimClear CX875 filters
Unicel® C-7495
Part numbers and brand names are provided for compatibility reference only.
Key Features:
112 sq. ft. of filtration area
Reinforced end caps for structural integrity
Banded pleats help maintain flow and simplify cleaning
Open core construction enhances water movement and pump efficiency
Suggested Replacement Cycle:
Replace annually for single-cartridge filters
Monitor pressure gauge and water clarity to determine replacement timing
Benefits of Pureline Cartridges:
Reliable performance at a lower cost than OEM
Easy to install with no special tools required
Reduces energy consumption by maintaining optimal flow
Disclaimer: This is an aftermarket product. Manufacturer names, part numbers, and trademarks are used solely to demonstrate product compatibility.
This Cartridge is Commonly Used In
Not Your Cartridge?
Is this not your Cartridge? Don't worry, we carry thousands of Pool Filter Replacement Cartridges to replace all of the most popular OEM brands such as Sta-Rite®, Pentair® / Pac Fab®, Hayward®, Purex®, American Products®, Jacuzzi®, Hot Springs®, Coleman®, and more. Click here for more Pool Filter Replacement Cartridges
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
I have a Hayward filter which requires 4 filters. Filter casing says to use either CX875RE or CX1380RE and I don't know which to order. The Hayward filter says on the housing that it is serial # 2487 and 330D32.
Reply
Your best bet will be to measure your cartridges. The CX875RE measures 25-1/2" Long and the CX1380RE will measure 32-7/8" long. We do carry both of these cartridges on our website in both the OEM and a Generic and I have listed links to each of these products below: CX875RE OEM http://www.inyopools.com/Products/07501352015358.htm CX875RE Generic http://www.inyopools.com/Products/00100000010677.htm CX1380RE OEM http://www.inyopools.com/Products/02200001004497.htm CX1380RE Generic http://www.inyopools.com/Products/06400001004498.htm
Reply
Part PL0113. Does this part replace a 9 year old Hayward part noted as C-875
Reply
Hi Bruce, Yes Part PL0113 does replace a 9-year-old Hayward part # C-875 This would be the correct replacement cartridge.
Reply
Will this replace my filters? Please see attached - It is a Hayward filter system
Hi Josh, could you send us a few photos of the entire filter label or the part numbers that should be molded onto the actual cartridge elements themselves? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
is this item returnable if it is wrong
Reply
Hi Barbara, Yes it is. Just make sure it is in unused condition and water has not passed over it. If it did not fit you would just be responsible for the return shipping.
Reply
Less than 1 hr
Socket Set
1 0
I removed the filter top, removed the top piece and removed the four filter cartridges. I installed the new cartridges, added the goop to the rubber O-ring and re-installed the top. Saved a ton of money getting the generic filters from INYO Pools!