1. Home
  2. Pool Parts
  3. Pool Pump Parts
  4. Flotec AG Pump, Models FP6121-01 & FP6131
  5. BN25V1

$210.00

Qty:
 ADD TO CART

By Century Motors

Details

Top

Part # BN25V1

Warranty 1 Year

Dimensions 12" L x 6.5" W x 6.5" D

Alternate Part #'s 0-187873-20, 1510Z-1-EC, 1510Z-1-EKC, 1510Z-1-ESC, 1510Z-1-EXSC, 1510Z-1-XEC, 159862, 159964, 16436, 164950, 165369, 165846, 168507, 168970, 173315, 176505, 177386, 177614, 177748, 177760, 177760PJ, 177769, 177894, 177955, 177961, 178872, 182520, 182718, 182746, 182833, 184307, 184395, 184878, 186884, 187809, 187810, 187872, 187873, 190613, 193390, 193868, 196035, 1D157, 1D162, 317P239, 317P292, 317P358, 317P410, 317P420, 317P479, 35-6472, 356495, 7-193670-24, 90106543, agl10fl1, B025, B029, BN025, BN25, BN25SS, BO25, C1454, CBT2102, H640, H667, H910, M-181AG, M-191, MTG-H640, S48A46A07, S48A84A04, S48B74A03, S48B89B95, S48C51Z01, S48L2A16, S48L2A26, S48L2A26A1, S48L2A26A2, S48L2A28, S48L2A29, S48L2A38, S48L2A41, S48L2A41A1, S48L2A41A2, S48L2A6, S48L2A6A1, S48L2A6A2, S48L2A6A3, S48L2A6A4, S48L2A6A7, S48L2A6A8, S48L2A8, S48L2A8A2, S48L2A8A3, S48L2A8A4, S48L2A9, SP-1515-Z1B, SP1510Z1TXE, SP1510Z1XEW, SP1510Z1XT, SP1510Z1XTBK, SPL10FL1, SPX1510Z1XE, 35-126-1010, CRMBN25V1

Product Description

Century 1.0 HP Thru-Bolt 48Y Motor - BN25V1 **NOTE THIS MOTOR IS SHIPPED LESS ON/OFF SWITCH. YOU MAY PURCHASE THE ON/OFF SWITCH SEPARATELY BY ORDERING PART # 18374501.**

Application: Above Ground Pools & Spas Replaces: Sta-Rite, Hayward, American Products, Hydra Bath, Pac Fab, Jacuzzi, Doughboy, Etc... Features: All copper windins, Auto protector, Open drip proof, Stainless steel threaded shaft, Thru-Bolt pump mount, "1081" design, 60 HZ , 115V, HP = 1.0, Full load Amps = 11.8, Frame 48Y, Threaded Shaft

Note: NOT California Title 20 Compliant. 

Complaint Options: None

 

Product Specifications

HP:
1.0 HP
Frame:
48Y
Volts:
115 V
Single Speed Pump:
Single
Amps:
11.8 amp
Service Factor:
1.0
Total HP:
1.0 HP
Manufacturer:
Century (A.O. Smith)
Shaft:
Threaded
Flange:
Thru Bolt
RPM:
3450 RPM
Phase:
Single
Speed:
Single
Top
Ask A Question

?     Asked on 8/6/2012by Guest

Does this motor come with a cord? If not, do you supply the correct cord?
 Reply

A  Answered on 8/6/2012 by InyoPools Product Specialist Patrick P.

The Magnatek BN25 does not come with a cord. For a 115 volt application, if you need a twist lock cord, you can find it here: http://www.inyopools.com/Products/07501352011327.htm or a standard 3 prong cord here: http://www.inyopools.com/Products/07501352015032.htm  
 Reply


?     Asked on 2/28/2013by Guest

Is there any difference between the AO Smith BN25 and the BN25V1?
 Reply

A  Answered on 2/28/2013 by InyoPools Product Specialist Patrick P.

No. The AO Smith BN25 and the BN25V1 are the same motor. The BN25V1 is the newer part number for the motor.
 Reply


?     Asked on 5/11/2015by Dave

Does this motor come with the power cord and on-off switch?
 Reply

A  Answered on 5/11/2015 by InyoPools Product Specialist Patrick P.

Hi Dave, There is not a switch on the back of the motor. The on/off switch is part number 18374501 and can be purchased separately. This motor does not come with a cord as normally you would remove the cord off of your your current pump and use it with the new motor.
 Reply


?     Asked on 10/3/2015by Juan

can I replace this motor with a 2 speed motor
 Reply

A  Answered on 10/7/2015 by InyoPools Product Specialist Lennox H.

Hi Juan, You can replace the 1 HP Single Speed Motor (BN25V1) motor with the 1 HP 2 Speed 115V Thru-Bolt Motor (BN37).
 Reply


?     Asked on 6/14/2016by Russell Keegan

Wiring for BN25V1. Black, white and green. No line listings just terminal 1-6. I know green to ground. Black and white?
 Reply

A  Answered on 6/18/2016 by InyoPools Product Specialist Lennox H.

Hi Russell, The "black" wire goes to the L1 terminal, the "white" wire goes to L6 and the "green" to the ground.
 Reply



Read all Q&A’s
Top
Write A DIY Story
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Socket Set, Wrench Set

1     0

My old motor (15 yrs old) finally gave out.

Written on 7/23/2018 by Guest

Pulled the motor and pump off filter system took to garage removed old motor 4 bolts took pump apart 5 bolts and un unscrewed the impeller.
The new motor aligned up perfect new seals and o rings went together like a charm. Took about 20- 25
minutes new motor is so quiet can hardly hear it run.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
(0%) 0 of 1 customers would recommend this product to a friend.
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)
Write A Review

Recommended Products