I had a loop loc cover installed 16 years ago. Will this cover match up with the existing grommet pattern?
Reply
this will not match anchor points for a loop lock. If you want to match points we will need your A-B measurements or you can send in your cover for a price template.
Reply
My pool is 16x32 I have a mesh cover now that's need to be replaced. The deck is concrete with anchors 5' apart. would I have to install new anchors? Thanks Joe
Reply
Hi, Joe. If you're not using the same cover as your existing one, you will have to re-drill new anchor points.
Reply
My pool is actually a 15 x 30 w/ 4 x 8 center step. What size should I order
Reply
Hi, Joey. Unfortunately, we do not have a stock cover that will properly fit your size pool. You will need to complete our Custom Safety Cover Form.
Reply
does your mesh safety cover come with the anchors, what is the length of the 16x32 with the center step
Reply
Hi, Gen. All safety cover includes anchors for concrete installation. The length is 38 ft. including the step portion.
Reply
i have steps at one end ?
Reply
Good afternoon, James, if you want to order a cover with flush steps to a side you will need to fill out our custom cover form.
Reply
What is the anchor point diagram?
Reply
Good afternoon, At this time we do not have the anchor point diagram for the covers. If you are trying to match to points you have we recommend sending in a custom cover form with your AB measurements.
Reply
