My filter tank is leaking. I have the lock knob turned all the way closed. I have taken off the lid, cleaned the tank seal and it looks in good condition. I put petroleum jelly on it to help seal, but still leaking. Do I need a new tank seal?
Reply
Hi Kathy, Yes I believe the new tank seal will solve your problem.
Reply
What are the dimensions of this ring? We are trying to decide if it is the right one.
Reply
Hi Ben, This O-ring measures roughly 15" in diameter and .25" thick. This O-ring is used specifcally on the Game Sandpro Filter System.
Reply
I replaced the o ring and the tank ring because it was leaking, but after replacing both the tak is still leaking. Help what do I do?
Reply
Hi Jackie, Check to make sure that the o-ring is lubricated and seated properly and the clamp is tighten. If it is still leaking then the lid or tank body may be the issue.
Reply
i have a hayward filter system serial #37970/330G303 holds 4 filters is this the tank ring i need
Reply
Hi Scott, This Tank O-ring will not fit none of the Hayward Filters. We will need to know which model Hayward filter you have in order to locate the correct Tank o-ring.
Reply
