What size is the connections? or
Will this hose fit a Waterway Clearwater 22" High Rater Sand Fitler and I am running a Pentair Dynamo 1.5 Horsepower Above Ground Pool Pump - 340210. I am looking for a hose or connectors to go from pump discharge to filter inlet.
Reply
Hi Seth, This hose can be used with the Waterway Clearwater 22" filter and Pentair Dynamo pump.
Reply
have a Pentair Sandollar pool pump sand filter 2014 motor model # DYNIINI. Will this hose work between pump and filter?
Reply
Hi Dale, This hose will connect the Pentair Sand Dollar filter to the Pentair Dynamo pump.
Reply
The hose Rob recommended is not like the one that I have. Mine has a screw down nut on both ends. Please let me know.
Reply
Jim, If you look at the photo closely, both nuts are present. The nuts are not glued into place and can slide from one end to the other.
Reply
How long is this hose I need 30"
Reply
This hose is 34-1/2". Please click this link for the 30" SD40 Sand Dollar Filter Hose
Reply
I just bought a Pureline 1502 from you. What adapter do I need to fit the pump to this hose? Currently the hose does not fit into the pump.
Reply
I need an adapter female 2.5 reducing down to 2 1/4 male any suggestions
Reply
Tim, we apologize for the inconvenience, however, we do not have any reducer matching that description in our inventory.
Reply
I need a replacement hose that goes between a Dynamo DYNII-NI-1 and a Sand Dollar Filter Assembly PNSD004ODE11XO. Will the Filter Hose Kit Sd60 2009?current work??
Reply
Yes, this hose should work as long as your filter is the 2009 to Current style.
Reply
Need filter to pump hose for dyn n1 pf340063. Will Jose 155711 work?
Reply
This will depend on the model filter that you currently have and the approximate year the system was installed.
Reply
I current bought a new pool pump Pentair Dynamo DYN N1 #PF340063 this replaces the original DYN N1 #340063, as this was manufactured in 2012 and believed to have been installed around 2012 or so.
Reply
Hi Wes, Would it be possible to post a few photos of your pump and filter? A wide shot showing both the pump and filter would be helpful. To supply the photos simply click the reply link below to upload your photos and then we can make the proper hose recommendation.
Reply
See pictures
Wes, thanks for the photos those were super helpful! Yes the 155711 Hose is what you will require for the Pentair Sand Dollar and Dynamo Pump filter system in your photos. We do have this hose in stock ready to ship!
Reply
I need one of these that is 50" long. How/where can I find one at that length?
Reply
For us to suggest the proper hose could you send a photo of a wide shot of your complete pool pump and filter to show the pipes going in and out of the pump and filter? Also any close up photos of labels on the pump and filter. To supply this photo simply click the reply link below and upload your photo. Once we get this photo we can make the proper recommendation for the seal kit.
Reply
This filter came with a pump that I am now replacing and relocating, making it necessary to have a 50" hose now.
Hi Steve, For the heavy-duty pump to filter hose with union the longest size this comes in is this 33-1/2" Sand Dollar Filter Hose We do carry the similar hose which is on your return side of the filter which does not have unions and is not as heavy duty this hose comes in an 8' length here - 8' Above Ground Pool Filter Hose you would also need 2 of these Filter Hose Adapters
Reply
Can we not get with the manufacturer to get one made up? If not I will hard pipe it or make one myself. I was hoping we could get this done. Thanks for your help!
Reply
Unfortunately the manufacturer will not make these in custom sizes. So I would suggest doing this on your own, this Sand Dollar Valve Union Kit may be of help when you tackle this project.
Reply
Hose is 34 1/2. Is this total length including unions or hose only? Unions would add another 2+ inches for 36 1/2 total length. Thanks
Reply
The 34-1/2" includes the unions. Could you take a photo of your pump and filter system as this may help us determine the proper hose for you. Just click the reply link below to upload your photos.
Reply
36 1/2 pump to filter. End to end ; including fittings
I'm sorry we only carry this 34-1/2" hose and it is the longest we carry. We have searched with the manufacturer and we cannot find a 36-1/2" offering. There is a male adapter that threads into the valve so if you are including that male adapter in your measurement then that might be where the extra 2" is coming from. Key #2 in the attached photo is what I'm referring to.
I need a replacement hose for a Sta-rite 340210SR pump to a Sta-rite cristal-flo II 60 GAL SAND FILTER.
Reply
Hi Monte, We are showing this 155711 Hose Assembly would be the correct hose for your system
Reply
I need to replace my pump to filter hose on this model pump! It I’ll need to be about 34” long
Good afternoon, yes the Pump To Filter Hose Kit Sd60 2009/current (155711) would be the kit we would recommend.
Reply
I have a Pentair Model # S48AB86A03 pump I need a replacement hose pump to filter. Is this one right? Photos attached
You will need to check on the filter tank for the filter model number to verify which is needed. See key#3 https://www.inyopools.com/parts_pentair_sand_dollar_system_2009_to_current.aspx they will vary for models SD35, SD40, and SD60. There should be a label on the lower tank body that holds the sand.
Reply