What parts are included in this?
Reply
This skimmer comes with a Hydro Sweep Recirculation package which includes the following: SP1023 wall fitting, SP1419D eyeball fitting, (2) 1½" x 1 1/4" hose adapters, and SP11041 Skim Vac adapter plate to allow for vacuuming the pool. Also all gaskets are included as well.
Reply
Is there a cover faceplate available for this skimmer? I mean a plate that makes a waterproof cover inside the pool so that water does not enter the wide mouth skimmer.
Reply
Hi Brendan, You can find all replacement parts for this skimmer via our Hayward SP-1091WM Wide Mouth Skimmer Parts List.
Reply
the skimmer I have only has 16 holes. can I use this skimmer with 18? I know they won't line up, will it draw tight enough to stop leaks?
Reply
Hi Pat, This skimmer can replace your skimmer, it includes the gasket that will prevent the skimmer from leaking.
Reply
Will this work if you do not have a place for the skimmer, meaning, I will have to cut a hole for it?
Reply
Hi Dan, If you have a hard wall pool you can use this skimmer and may have to make additional adjustments. This skimmer is not recommended for soft side pools like Intex or Coleman.
Reply
Can this be used on an inground cement pool with a vinyl liner?
Reply
Hi. This skimmer is not suitable for inground pools installation, you'll need p/n the AutoSkim w/ 2-inch Ports Vinyl / Fiberglass - SP1084.
Reply
I'm looking to replace my wide mouth skimmer but I would like to change to a 2" fitting as most skimmers are 1-1/2". Do you carry any wide mouth skimmers with a 2" f.m. thread to supply the pump ???
thanks
Reply
Hi, Bruce. Unfortunately, all above ground pool skimmers have 1-1/2" FPT ports. You will have to use an adapter in order to use your 2" pipes.
Reply
im looking for a weir for hayward skimmer the part # i have is sp1091e.
is sp1091wm the same skimmer?
Reply
Forest, the Weir Door SP1091 (spx1091k1) would be the correct replacement for your SP1091e skimmer weir door.
Reply
I have a Hayward 24 ft x 4.6 ft above ground pool, I need a new skimmer but do not know what the model # would be
Reply
Hi Linda, could you please supply us with the dimensions of the skimmer opening in your pool?
Reply
Does the Hayward winter skimmer cover for the Widemouth just snap on for the winter? Or...do you need to screw it on?? The picture looks like it comes with the back with the screws and then the cover.
Reply
The Winterizing Skimmer Door Cover Kit installs by replacing your current skimmer faceplate with the one that comes with the winterizing kit; the plastic cover then snaps onto the new faceplate.
Reply
