My pump is leaking around the plastic inspection glass. Just recently started. There has been no damage to the machine. Put a gasket on that appeared to fit but it continues to leak. Any suggestions ?
Reply
Hello Warren, you might try checking whether there is any cracks or hairline fractures in the housing area, that could cause a slow leak or dripping depending on how much pressure is built up.
Reply
I have a S1LR-3 - 94027935NBOX it has a crack down the housing where the basket sits. will this one fit and replace the one i have?
Reply
Yes, the Strainer Case Assy W/ Plug Top Discharge - 16-1120-05-R is correct for the center discharge pumps with your model number. The Cover Gasket - Square Ring - 47025853R should be replaced when replacing the housing. The Strainer Case Ass'y 90 Degree Discharge - 16111700R is for the side discharge pumps and will use the same square ring.
Reply
I have Jacuzzi pump model 177760PJ and cracked the housing unit on pump. Is this the correct replacement? The only number I could locate is S15LR-3-51
Reply
Hi, This Strainer Case w/ Plug Top Discharge - 16-1120-05-R can be used with the S15LR-3-51 model pump.
Reply
My pump housing has developed a crack on the top discharge port. Will this be an exact fit for my pump? Model#:94028680,
Serial #:LR-0000101
Thank you
This is the correct pool pump housing for your Jacuzzi / Carvin pump.
Reply
