I have a Tagelus TA100D sand filter with a TM-22 clamp on style valve attached to it. I need to replace the valve as the plastic is cracking. I've found the replacement valve on your site, but also what appears to be a generic one. The Pentair manufacturer part number for the valve is 261185. I see part number 4601-1185 on your site, can you tell me if this part will work for my filter and also what the difference is? Also, what kind of warranty does it come with? Thanks
Reply
If you currently have the TM-22 valve then you have the generic valve made by Praher. For a long time Praher made the valves for Pentair and now Pentair is making their own valves. We have both the Pentair OEM and the Praher replacement. The only difference is the Pentair OEM will have a Pentair label instead of a Praher label. The Pentair is also quite a bit higher cost. Both have a year warranty and both are made by Praher. The OEM is 4600-1185 which you may view or purc
Reply
I have a Pantera sand pool filter. I need a new valve. I know the filter is very old but can't find parts anywhere for a "pantera" filter. Did Pentair make Pantera, and will the valves work on a pantera if they did? I can't find the model number on the filter at all. On the valve handle says Sta-rite, but I don't know if that is a handle name of valve name. it is a 6 position sand filter with 2 inch hoses and clamped on. thanks.
Reply
Hi Scott, Your correct replacement valve for your Pantera filter will be part number (4708-0)
Reply
I want to purchase a multiport valve for my pool filter. It is a Purex Tritton II/ It is a TR100. It is a sand filter and model MS 20-3. Could ;you tell me where I can get a new valve for my filter?
Reply
Please click here to view the schematics of the Pentair Triton 2 Fiberglass Sand Filter. We offer a complete listing of the valves and any other parts available for your filter. http://www.inyopools.com/pool_parts_pentair_triton_2_fiberglass_sand_filter.aspx
Reply
how do i know what fitting is the inlet, outlet, discharge etc.
Reply
Hi Robert, The pump port is the on the top left, the return is on the bottom right and the waste is on the opposite side all by itself.
Reply
I have a Sand Dollar filter that I want to put 2" plumbing on. Will this valve fit that filter and would my old standup tube assy still fit?
Reply
Hi, Emily. This valve can only fit the SD80 sand filter, all the other model uses the 1-1/2" Top Mount Valve Flanged -262506. You can still use 2" plumbing but will have to use a reducer from 2" to 1-1/2" to the valve.
Reply
I have a Prayer tm 22 valve with 2 inch inlets and outlets. Will this model be an exact replacement 4600-1185?
Reply
Hi, Randy. The p/n 4600-1185 is an Inyo number for the Pentair Top Mount Valve - 261185. So if you currently have a filter that uses the Pentair 261185 valve, p/n 4600-1185 can be used to replace it.
Reply
i recently purchased a tagelus 100d and just naturally assumed that it would come with 2" ports, however, i see now that this valve also comes in 1 1/2" ports. Which one comes standard so that i know if I need to contact my seller and either cancel the order or have them replace the valve before shipping
Reply
Hi. The TA100D filter comes with a 1-1/2" mpv valve. I checked with Pentair and there is not a TA100D that comes with a 2" mpv valve.
Reply
will this replace a tm22 can I buy just the handle spring and top assembly
Reply
Hi, Karen. Replacement parts for this valve are listed on the Pentair - Praher 2" TM22 & SM20 Parts Diagram page.
Reply
Can you use the Pentair Sand Filter Valve MPV TM Clamp 2in, 261185 as a replacement for Pentai Tagelus 1.5 in Top Mount Multiport Valve with Clamp, 262506? I would like to upgrade all of my plumbing to 2" and this multiport valve seems like it would do the trick. The filter is a Tagelus T60
Reply
Yes, you can use the 261185 2" valve as a replacement that will get you to 2" plumbing.
Reply
will this work with the triton tr140c
Reply
Hi Penni, unfortunately, this multiport valve is not compatible with the Pentair TR140-C sand filter. Please see this parts diagram and scroll to the bottom to view the compatible multiport valves for this filter series.
Reply
Does this come with an o-ring or is it bought separately? Also, which o-ring should I buy if it is not included?
Thanks!
Reply
Hello Dillion, the oring would be purchased separately. You can review the parts listing for the American Products/Pentair Eclipse and Meteor TM.
Reply
does this fit for a replacement on a Sta-Rite T-240p-1 sand filter?
Reply
The Sta-Rite Cristal-Flo Sand Top Mount T-240BP-1 uses the 1.5" valves called the Praher Top Mount Valve 6-Way - TM-12-L
Reply
Hello would this fit a Pentair Sand Dollar SD80 ?
Reply
No this does not fit the Sand Dollar Filter, you will need this Sand Dollar Filter Valve instead
Reply
Will this fit an aquatech AT-100 high rate sand filter ?
I have a Pentair Model TM-22 Valve on it now.
Hi, You will actually need this TM-22-PB Replacement Valve we do currently have this valve in stock, however our inventory has been selling quickly so we would suggest ordering sooner than later =)
Reply
I will possibly need a new clamp for installation. Do you have one for this valve to mount to my sand filter ?
I believe you will require this clamp here - Filter Valve Clamp
Reply
Trying to get the correct replacement parts. Looking to replace the whole top assembly
Thank you for contacting Inyo Pools, The current valve 2" Top Mount Valve for Pentair Tagelus Filters Clamp Style - 261185
Reply
