Will this nut (4654-33)threading fit a Nautilus FNS band assembly (195151)?
Reply
This is not the nut for the Nautilus FNS you would require this Nut for the Nautilus FNS band assembly
Reply
I have a Titan filter that is a 1998 vintage. The Model number on the tag is: 56623200. The spring barrel nut will no longer hold. Will this nut work as a replacement? Please advise.
Thanks
Reply
Hi Rick, Yes this would be the correct Barrel Nut Assy. for the Titan RPM Vertical Grid D.E. filter.
Reply
I have all these parts. When you put them on the band screw end and try to tighten it slips. Can I buy just the bolt?
Reply
Unfortunately, it only comes in the assembly now. The bolt is not sold separately.
Reply
I have a Spring barrel nut assembly on my Pentair FNSP 48 filter. My unit is about 16 years old. The spring itself has 8 coils. All the new assemblies I am looking at have no more than 4-5 coils.
I am afraid that if I replace the old with new, that it may not tighten down enough to not allow leaks. Can you offer some help?
Reply
Hi. This Spring Barrel Nut Assy. - 53108900 will fit the FNS Plus original and current clamps offering a secured tight seal.
Reply
I have the Pentair Clean and Clear Plus Cartridge 320-will the 53108900 spring barrel nut assembly fit?
Thanks,
Reply
David, This Spring Barrel Nut Assy. - 53108900 will fit the clamp assembly that's on the Clean & Clear Plus Cartridge 320 filter.
Reply
I have a American Products Titan Vertical Grid Stainless Steel Filter from 1991. The Filter Model number is 58409000 and the clamp model number is: 530030. Will this work?
Reply
Hi, Nick. Unfortunately, this Spring Barrel Nut Assy. - 53108900 will NOT with the Clamp for your model filter.
Reply
Do you know the size and thread count for this part? I'm looking for a 1/4" - 20
Reply
Hi, Beverly. Unfortunately, we're unable to get the thread size and count for this item. It has proprietary threads and can only be used with specific Clamp Assy Bolts manufactured for Pentair Pool Products.
Reply
Will the nut assy fit on my 180009 fns plus 60? I purchased a Pentair 194997 Machined Nut Replacement off of Amazon and it would not go onto the screw.
Reply
are the t bolts all the same size, I have an older Titan DE am wondering if this nut assbly will fit my t bolt
Reply
Hi, Terry. The T-Bolts are not all the same. The Titan CM D.E. and the Titan RPM D.E. use the same T-Bolt. The Titan Stainless Steel D.E. uses a different T-Bolt.
Reply
will this nut assembly/spring (53108900) work on american titan cm grid filter? the clamp is fine as well as the threaded bolt- just need the 'barrel' looking brass screw as the old is 'slipping'. how does this nut and spring work as it is different than just the old brass barrel nut. thank you
Reply
Yes this is the proper spring assembly for the american titan cm grid filter.
Reply
