My pool filter locking ring has split. The filter is a Pentair CC50 with a paper filter. Is this the correct replacement part?
Reply
Hi Martyn, The Predator Locking Ring (59052900) is the correct replacement locking ring for your Pentair CC50 Filter.
Reply
Is this the correct part for the canister for the filter for a Pentair clean and clear that uses CCP 320 filters? Unicel C 7470?
Reply
Hi, The Clamp Assembly (190003) would be the correct clamp for Pentair Clean & Clear filter that you have.
Reply
I have a filter compartment P?N 178555 REV C. I need the Ring, Locking Predator. It is broke. Is this (59052900) the correct one.
Reply
Hi David, This would be the correct locking ring the can be used with p/n 178555.
Reply
Will this ring fit a Triton Purex filter, I was wondering if this ring is a standard size for
all filters for clean and clear, the reason for asking the numbers on the filter are faded thanks jeff
Reply
Hi Jeff, This Locking Ring will fit the all of the Clean & Clear/Predator Filters.
Reply
Do I have to buy the entire piece or can I get the one part - for
Pentair 59052900 Locking Ring Assembly is fine - but it is missing the spring and the part that holds the spring in place - they were loose and would fall out - but if held in position and then placing and locking the assembly into position - the ring would be locked on both sides and function. Can I get just the spring/plastic part
Reply
Kim- We do not sell parts for the locking ring, and I do not see any parts listed by the MFG for that 4652-02 Ring, Locking, Predator (59052900), you would have to purchase the entire ring.
Reply
have a pentair sand filter leaking looks like screws are stripped out can not tighten PNSD0040DE1160 .. what could be a proper replacement ring the 4652-02 or another?
Reply
Hello Shirley, I think the part you are looking for is Valve Clamp, Plastic (152165) part 4600-2162 this is what I came up with out of your part number you have provided PNSD0040DE1160.
Reply
I have a purex/pentair Triton Warrior 66 filter. The clamping ring broke. The measurements you give are the same as this one and it looks just the same. Do you know it it will fit my filter?
Reply
Hi, Ruth. Yes, this Locking Ring will fit the Pentair Warrior 66 filter.
Reply
will this locking ring fit a pentair filter model 60318?
Reply
I believe you mean the 160318 Pentair filter and not the 60318 filter. Yes this lock ring does fit the Pentair 200 Sq. Ft. 160318 filter.
Reply
We have a Pentair clean and clear RP model 17874r Rev A will this ring fit. The inside is 12 inches. The outside is less than 17 inches, more like 16.5
Reply
Will this locking ring fit predator 56408400. Also what lid would fit 56408400 in case I need one. I have changed the O ring and did lube but filter is leaking in locking tab area. If all fails what complete filter would replace the 56408400 predator. Any help would be greatly appreciated.
Reply
Hi, Clifford. Yes, this Lock Ring - 59052900 will fit the Predator filter system. However, I was unable to cross-reference the number provided to a specific model. I will need to square footage of your existing filter in order to recommend a replacement.
Reply
Hi will this fit on a Pentair Clean & Clear Model CC200? Thank you!
Hi Joanne, yes this lock ring is compatible with your Pentair Clean and Clear 200 sq. ft. model filter. I have also emailed you an estimate attached to your account with us that you can convert to an order if you would like. It is ready to ship.
Reply
