is this part a direct replacement for the existing American Products part number 393016. My lid is getting stress cracks around the perimeter and I need a replacement. Will this lid work?
Reply
This is a direct replacement for the AP Ultra Flo or Americana Pool Pump. The outside diameter of the lid is 7 3/4" and the diameter of the inside lip measures 6 5/8". Please verify the pump model or lid dimensions prior placing your order.
Reply
the lid v38-160 attaches to the inside the clips all broke off. do you sell something to hold this lid in place.
Reply
Hi, This Lid (V38-160) is used with the Lock Ring (V38-137).
Reply
I need a new lid for my basket. last 4 are 3017 . I tried 3018 but it is just a hair to big . What will replace 17. ken
Reply
Hello Ken, Please look at American Products Ultra Flo Parts to see if the Lid, (new Style) (39301700) and see if DIMENSIONS 7.55" X 1.7" work, because the Lid (v38-160) is DIMENSIONS 7.75" X 1.5". See on our sites listed look at pictures below with size and where to measure from.
Reply
i NEED THIS TYPE OF LIDS FOR MY POOL PUMP. THE OUTER DIAMETER IS 7 1/2 OR 7 3/8 BUT THE INSIDE MEASUREMENTS IS
6 1/2. dO YOU HAVE THIS PART?
Hi, Pablo. Please provide the model or a picture of the pump strainer assembly.
Reply
That is the main problem Ken, the pump itself where the lid is attached to it has been exposed to lots of sunlight, Therefore, the model number is no longer visible. All i know this product in an American pump part or Americana, I did bought from you a similar lid with the dimension of & 3/8 on the outer perimeter and 6 3/8 the inside perimeter. This part almost fit except the inside perimeter is a little too big, which mine is 6 1/2
Reply
Hello, Can you please send a side view picture of the unit?
Reply
I need a replacement lid and o-ring for my American Products P/N 393016. Will this fit it?
Reply
Yes, the Val-Pak Products Lid (v38-160) will replace your p/n 393016. The replacement o-ring would be the O-ring Lid - 39300300.
Reply
Looking for a replacement lid for this Americana pump. Is this the right one. Picture attached.
Hello - For your Bronze American products Americana, the replacement strainer lid is the Trap Lid, American Products (39301600)
Reply
Need replacement lid for 393017?
.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Val-Pak Products Val-Pak Replacement for Pentair American Products Ultra-Flow Pump Strainer Lid - V38-160")
Thank you for contacting Inyo Pools, The correct Lid is Lid (New Style) - 39301700 for your pool pump.
Reply
Need replacement lid for 393017?
Reply
We do carry your lid, please click this link here to view or purchase 393017 Pool Pump Lid
Reply
