I have a dough boy above ground looks like a metal coping strip over the liner but it's rusting want to change it with plastic is this the right stuff to get
Reply
We do not carry parts for the Doughboy line of pools.
Reply
Do you have 2" copping?
Reply
Hi Lisa, No, we do not have 2" coping that can be used on above ground pools. We do have the Cinderella Aluminum Pool Coping for in ground pools.
Reply
We are replacing our liner in our Atlantic Admiral Model 18 ft. above ground pool. The plastic coping and aluminum top stabilizer rail need to be replaced as well as the some of the top caps. Do you carry these?
Reply
Hello Deborah, on the coping strips S1382480 and depending on what type of top caps you have most AG pools parts are special order (2-3 weeks).
Reply
Are these the type that go over a round top stabilizing rail? the stabilizing bar sits over pool wall.
Reply
Hi, Bill. These coping strip are used to secure the liner to the pool wall then the slotted tube and connectors are installed.
Reply
I need to know if the coping are half inch rounds. I need some for a 12 by 24 oval pool. I have aolder pool and need new coping clips . right away. Thank you
Reply
Hi, Patricia. This Coping is 7/16"-ID and 9/16"-OD as shown in the Product Dimensions.
Reply
I have a haughs regatta 15-24 above ground pool. I need new plastic coping pieces. Are these the correct ones I need? I also need a few new gray top caps. What are the correct ones ?
Reply
Yes, part number S1382480 can be used on the Regatta model. The gray top cap is part number 1490190. Unfortunately, those caps are currently unavailable. We do not have another replacement option.
Reply
I am looking for a part to secure the cover on my pool edges, to prevent the cover to blow off. Would this work?
Reply
We have a 15X24 Leisure bay above ground pool , the copings are metal approx. 47 inch's long! Are metal ones available? It appears they need to be metal for strength, the ones on there are metal, and rusty!
Reply
Thank you for contacting Inyo Pools in regards to your above ground pool needs. In order to ensure we get you the right parts, can you please email us a picture of the outside pool wall (top and bottom)? As well as a picture of where the top rail meets the upright?
Reply
I am looking for coping that will work for the oval shaped metal frame Summer Waves, Elite model of pool. Do you have anything?
Reply
Unfortunately, we do not carry parts for Summer Waves pools. We recommend the following site. https://www.polygroupstore.com/polygroup_pool_parts_s/158.htm
Reply
