Hi,
I have a Hayward C5520 cartridge filter system. Just noticed a small crack in the lower housing. Actually a few stress cracks but only one is leaking, slightly at this time. I imagine it will get worse soon. Is the lower filter body you show on your site the correct replacement for the 5520 - dex2420at?
Let me know.
Tony Sherman
Reply
would this filter body part fit the c4000cp body part (the bottom half of the filter housing)? Is it the same size?
Reply
Hi, This Filter Body (DEX2420AT) will not fir the Hayward C-4000 unit.
Reply
will this filter fit exactly with the top filter body and my existing plumbing..
Thanks.
Howard
Reply
Hi Howard, as long as you have a Hayward SwimClear or Pro Grid Filter then yes this would match up exactly with your filter top.
Reply
Will this bottom be acceptable replacement for Hayward micro clear de 36. Another web site says this will work. Can you confirm. Thanks in advance
Reply
Hello Scott, This bottom body tank 4811-43 would not fit your Micro Clear 36, I would contact Hayward 800-657-2287 to see if there was a part that replaced it because this part for the bottom body tank is obsolete to better assist you with your search.
Reply
We purchased the original DE filter 4820 in 2002 and recently the base burst. Is the dex2420at compatible since the model year is before 2008?
Reply
Hello- Yes , the Filter Body - Taupe (dex2420at) is the correct replacement base to the DE4820 Hayward filter. Please note that the base does not include any o-rings, clamp, or any other parts. This is just the base and if you need to replace any additional parts, please reference the Hayward Pro Grid Perm-A-Glass DE Parts diagram.
Reply
Will this body fit a Older (1999) 4025 unit? My existing unit uses C-7487 Cartridges. Would this be the right one? Are the threads the same?
Reply
Hi, M. Smith. This Filter Body - DEX2420AT will fit the Hayward C4025 filter, the port size and threads are the same.
Reply
I have a Hayward C 4000 Cartridge Filter Assembly - it is 20 years old and leaking - I need to replace it but am told it is no longer manufactured- I found the Hayward C5020 on your website and would like to know the price for the entire assembly ready to be plumbed in to my old system-
Thank you
William L Forkner
Reply
Hi, William. The Swimclear Cartridge Filter 525 Sq Ft. Filter - C5030 is the current model.
Reply
Top of the day to you, I currently have a 15 year old C4020 cartridge filter,its still working fine! How long should I expect to get service from this unit and with a 38,000 gal pool/spa which unit should I up grade to - staying with a cartridge filter system . Many TKS Bos'n
Reply
Does the replacement part DEX2420 AT come with the internal riser and plug for the body or will I need to replace these. Can I just swap out the filter and reinstall the clamp and inlet/outlet or is there other internal plumbing parts I will need new or switch over?
Reply
Hi, Danny. No internal parts are included, you will have to reuse those parts.
Reply
where to plumb the inlet to the tank from the motor. is it the bottom hole or the top one?
Reply
If this tank body is being used on a Swimclear cartridge filter, then the pump is plumbed to the top port.
Reply
I need a Hayward DE7220 filter base replacement. I'm guessing this one won't work, but what is the correct one and does anyone sell them?
Reply
Hi, Anthony. This Tank Body w/ Clamp - DEX2420ATC will work with the DE7220 model filter.
Reply
I asked if the DEX2420ATC would fit my DE7220 and I measured the diameter of the bottom (18") and the heights to the pool inlet and outlet. (12.5" and 17.5"). This matches the 4820 dimensions, so I'm hoping the DEnn20 filters all share a common base and only the top varys depending on model. This would make sense from a manufacturing and installation perspective so I'm hoping someone can verify.
Here's to hoping!
Reply
Hi, Anthony. This Tank Body w/ Clamp - DEX2420ATC will work with the DE7220 and all other Hayward ProGrid filter models. The Lid is the difference between the other models.
Reply
Hi, I have a Hayward c4020 filter tank assembly. Can I use this tank bottom as an exact replacement. Thanks
Reply
Hi John, yes, the Tank Body w/ Clamp - DEX2420ATC will be a perfect replacement for the bottom of your Hayward SwimClear C4020 filter.
Reply
