Will this fit Columbia Multiport velv TM-12?
Reply
Hi, Mattias. I don't have enough info on the Columbia system to confirm if this clamp will work. If you can get us dimensions we can confirm if this clamp will fit.
Reply
will this clamp fit cooper ranger series sand filters model no RS-2115 part # 2006-1
Reply
Hi Melvin, yes this clamp does fit the Cooper Ranger series sand filters model no RS-2115 part # 2006-1
Reply
I recently installed valve TM-22-L on a Tagelus TA-100D sand filter. This L valve has same diameter but a thicker base than my original valve and my clamp does not fit. I understand that this clamp works with a TM-22-L valve, but will it fit properly with the top of the TA-100D?
Reply
I am in need of a filter clamp for an Intex sand filter model SF80110, do you happen to have one???? Need one now!
Reply
Hi, Felix. this clamp assembly will not fit the Intex SF80110 model filter. You will need to locate a dealer of Intex parts for p/n 11380.
Reply
I have a Ranger RS16, I need the clamp, but your part number (4770-14) does not match the part # I have in the users manual (2061-1). Is it a different system or will your clamp work?
Eugene, yes our part number (12l-clp) is the correct part to replace the clamp on the RS16 filter, which is a direct replacement and match for the 2061-1 part number from the manual.
Reply
Will this clamp fit a D-600 Top Mount Sand Filter? D-600 is the only reference to any identification I can find on the filter so I looked online and think it might be an Astral Filter.
Hi Anita, can you please provide another picture of the top/entire valve and also a more complete picture of the sand filter? Once we get those images we should be able to give you the proper recommendation. You can upload those here or for a quicker response use our live online chat feature through our web page.
Reply
Will this fit a Columbia Sand Filter? Thanks
Reply
Hi, Could you send us a few photos of your filter to include a photo of the label on your filter tank, your filter valve, and a wide-shot of the complete filter and valve? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
Will this fit Aquatools AT3124 filter? Thanks
Reply
on this clamp are the 8.75x1 the inside dimension ?
Reply
Hi Jane, this clamp is intended for specific Pentair and Cooper filters and valves with flanges that are about 8-1/4" in diameter. The outer diameter of the clamp is 9" (10" at the fastening point) and it is about 1: high.
Reply
