will this replace a 6304 LU?
Reply
Hi Steve, We do not have any specs on the 6304LU bearing so I can't confirm if there interchangeable. If you can provide us with the motor model or compare the ID and OD measurements.
Reply
I need to replace the bearings on my pool motor. The motor is a GE C1246.
Can you tell me which bearings to buy?
Reply
Hello Brent, the part that is the replacement bearing for this is Bearing, 203 (62032rs) (Single) for $20.99 to replace the usq1152 which matches the motor you gave c1246.
Reply
I need to replace the bearing on a B2982 AO Smith (Century) motor. What size bearing do I need?
Reply
Hello Kurt, the OSE and SE bearing for this B2982 motor is 10000353 which our part number is 5270-31.
Reply
Need to replace motor bearing closest to pump due to seal failure. US motor Emerson EB843. Is this the correct bearing. Bearing came apart so don't have number but deminsions appear very close.
Reply
Need to replace motor bearing closest to pump due to seal failure. US motor Emerson EB843. Is this the correct bearing. Bearing came apart so don't have number but deminsions appear very close.
Reply
The bearings we carry are for A.O. Smith motors not Emerson motors.
Reply
I have a Pentair VS 3 hp motor # 350105
I've replaced the front bearing before and I believe it's a 6304xxx
The rear bearing must be larger due the shaft diameter by the fan.
Which one do I need? Thanks
Reply
Hi, Steve. Unfortunately, we do not have the bearing specs for the Penatir 350105 motor.
Reply
I have the part number from century motors for the bearings this are the bearing part numbers drive side 10000445 oher side 10000353 do you carry those
Reply
I need bearings for a Century Centurion B849 part 0-177896-22 can you tell me the part
# I need so I can order
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "U.S. Seal Manufacturing US Seal Manufacturing 304 Pump Motor Bearing - 6304")
The B849 will require one of the 6304 Bearings and one of the 6203 Bearings
Reply
What bearings do I need for the Century 1.5 hp B129 pool pump?
Thanks,
Steve
Reply
The B129 motor requires Qty: 1 6304 Bearing and Qty: 1 6203 Bearing
Reply
I have a centurion cat no B855 what bearings do i need
Reply
