How hard is this to install? Are any special tools needed?? If the pump is hard starting is it usually the pump or the motor?
Reply
Hi Rich, This is not too difficult to install and we do have a video which will help with the install. Normally the motor is the issue if it having a hard time starting up. Could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
will parts #SPX2605CKIT fit model #c48k2n143b1
Reply
If you have a Hayward Super Pump using the c48k2n143b1 motor then this is not the correct kit. You will need this 1 HP Super Pump Drive Train Kit
Reply
This is confusing. Is this kit for an SP1600 or SP2605X7 3/4hp pump?
Reply
Hi Allen, it is a bit confusing. The Super Pump SP1600X- Series Drive Train UpGrade Kit is made for a Hayward Super Pump whose model number begins with SP1600x; the Super Pumps with an SP2600x model number already have the "updated" drive in it which helps improve GPM, reduce noise and provide slightly better energy efficiencies. Your SP2605X7 pump had the updated drive installed at the factory.
Reply
Thank you for your answer. Do you have the drive train in stock for the SP2605X?
Reply
Yes, we currently have the Super Pump SP1600X- Series Drive Train UpGrade Kit 3/4 HP - SPX2605CKIT https://www.inyopools.com/Products/07501352011336.htm in stock for the Super Pump 3/4 HP Single Speed - W3SP2605X7 https://www.inyopools.com/Products/02201192001131.htm#parts
Reply
Will SPX2610CKIT work on SP2610X15
Reply
